SpeedQueen FF7 service manual ?

[johnbee]

Hello people,

I own a Speedqueen FF7. Great machine but the water lever is WAY too low. I tried to wash a comforter and it was dry in the middle.
I’m looking for a manual mostly to figure out how to remove the top lid so I can access the pressure switch.

Any ideas ?

John

 

[combo52]

Adjusting water level on a Speed Queen front load washer

There are little dip switches on the control board that allow you to adjust the water level, you'll need the manual to tell you which switches to adjust.

I got my new Speed Queen front load washer like this in the stainless steel version a little over three years ago at first I thought I wanted to turn the water level up a bit, but I've never had a problem with it getting everything wet doing a great job so I never bothered.

If you can't find the information, I'll try to find it. Let me know.

John

 

[Jamram109]

In this video, Ben shows you how to in tease the water level (switch 3) to an additional 0-2”, and also how to remove the pesky water saving features implemented by the government (switch 2) so it washes with a standard amount of water. But if you don’t want to do any of that, don’t use the Normal wash cycle as it doesn’t use nearly enough water and no hot water, despite what you may select on the temp settings. Good luck.

 

[whitewhiskers]

OK, that was super incredibly fascinating. And have no intention of opening up my FF7 as tempting as it is. Seems really complicated with great potential to break something - including me :-( But I'd sure be interested in seeing how far up the glass the water level can get....