Probably one of my most thorough rebuilds yet. Hope you all enjoy!
Washer rebuild
- Thread starter lorainfurniture
- Start date
Help Support :
justjunque
Well-known member
Eugene,
That...was...awesome!!!
As someone with zero mechanical ability, that was beyond amazing.
I loved the addition of the musical score. The tear-down almost sounded sad. Like the machine may have thought it was the end of the road.
Then, the meticulous labor of love on every nut and bolt.
Finally, the glorious and triumphant return to life!
I think I may have teared up just a little.
Man...I wish there weren't so many miles between us.
As the kids say, I'd be all; "Shut up and take my money!"
Not to mention, the fact that you could do it all in less than twenty minutes!
Beautiful work!
Barry [this post was last edited: 4/16/2020-10:35]
That...was...awesome!!!
As someone with zero mechanical ability, that was beyond amazing.
I loved the addition of the musical score. The tear-down almost sounded sad. Like the machine may have thought it was the end of the road.
Then, the meticulous labor of love on every nut and bolt.
Finally, the glorious and triumphant return to life!
I think I may have teared up just a little.
Man...I wish there weren't so many miles between us.
As the kids say, I'd be all; "Shut up and take my money!"
Not to mention, the fact that you could do it all in less than twenty minutes!
Beautiful work!
Barry [this post was last edited: 4/16/2020-10:35]
scrubflex
Well-known member
LOVE IT!!! What did you use to clean up and off the transmission shaft? And, what is the name of the sound quieter you used?
vacerator
Well-known member
Our 1995 Maytag
5 cycle Fabric-Matic was working perfectly still when hubby insisted on replacing it when the vintage 1988 Halo-of-heat gas dryer wore out in 2007. That only happened because we were all working a lot still, and the kids didn't tell me soon enough when it got noisy. The bulkhead sliced deeply into the drum and peforated it.
5 cycle Fabric-Matic was working perfectly still when hubby insisted on replacing it when the vintage 1988 Halo-of-heat gas dryer wore out in 2007. That only happened because we were all working a lot still, and the kids didn't tell me soon enough when it got noisy. The bulkhead sliced deeply into the drum and peforated it.
<span style="font-family: comic sans ms, sans-serif; font-size: 36pt;">THIS VIDEO GIVES ME LIFE!!!!!! Great job !!!</span>
jasonlittle
Well-known member
This is an awesome video I agree. Yes I was also wondering what the noise deadening material is that you put all over the inside of the machine. I would love to get some of that and put in both my washer and dryer. Even though they are both pretty quiet as they are. I would still not complain to add that extra bit of noise deadening to it .
christfr
Well-known member
awesome love those tags
Tchaikovsky's Maytag Symphony in AW major
A first class classical rebuild!
Was wondering if you ever replaced the brake gasket that ripped apart on disassembly. That happened to me and I cut a replacement out of a piece of heavy paper about the same thickness, but haven't put it back together yet.
Looked like you had some trouble getting the tub cover back on. That's why I'm afraid to take mine off to do a thorough rebuild as you did.
That video is really really AWesome, man. Thanks for letting us look over the shoulder of a master at work!!
A first class classical rebuild!
Was wondering if you ever replaced the brake gasket that ripped apart on disassembly. That happened to me and I cut a replacement out of a piece of heavy paper about the same thickness, but haven't put it back together yet.
Looked like you had some trouble getting the tub cover back on. That's why I'm afraid to take mine off to do a thorough rebuild as you did.
That video is really really AWesome, man. Thanks for letting us look over the shoulder of a master at work!!
Wonderful job! That machine is ready for another 42 years.
Sound proofing
The stuff for the lid
http://rover.ebay.com/rover/1/711-5...pr%3D1&hash=item21624df776:g:D8cAAOSwIWNdfb2a
The thick foamy stuff
http://rover.ebay.com/rover/1/711-5...1&hash=item1a867e55ed:g:URUAAOSwKUZdpth7[this post was last edited: 4/16/2020-21:57]
The stuff for the lid
http://rover.ebay.com/rover/1/711-5...pr%3D1&hash=item21624df776:g:D8cAAOSwIWNdfb2a
The thick foamy stuff
http://rover.ebay.com/rover/1/711-5...1&hash=item1a867e55ed:g:URUAAOSwKUZdpth7[this post was last edited: 4/16/2020-21:57]
As an eBay Associate we earn from qualifying purchases.
@hobbyapocalypse
That brake “gasket” is just to isolate noise. As long as it’s there mostly it’s fine. Make sure you grease up the pads if you ended up washing them. I didn’t and the washer started screeching when braking. I rubbed grease on it and it did fine.
I really struggle with the lid. It’s not hard yet for some reason it’s my Achilles heel. It’s just too damn adjustable. I would recommend making some markings so you can set it back the same depth as you removed it. It’s a pretty fun machine to rebuild. Like assembling a tank.
That brake “gasket” is just to isolate noise. As long as it’s there mostly it’s fine. Make sure you grease up the pads if you ended up washing them. I didn’t and the washer started screeching when braking. I rubbed grease on it and it did fine.
I really struggle with the lid. It’s not hard yet for some reason it’s my Achilles heel. It’s just too damn adjustable. I would recommend making some markings so you can set it back the same depth as you removed it. It’s a pretty fun machine to rebuild. Like assembling a tank.
jasonlittle
Well-known member
I’m having the same issue. The link takes me to the eBay homepage but that’s it.
blackstone
Well-known member
The Wrench!
In case you missed it, the highlight of the video was the wrench (with my name on it).
Kidding aside, this is the best video that I have seen in a long time. Great work!
It sure is easier to put in the washers on the outside of the tub when the cabinet it removed. Even when using rubber cement to hold them in place, it was always a pain to get those bolts to go through the washers and brackets. I'm referring to Blackstones, of course.
I must share this video, to friends who are not members of this club.
In case you missed it, the highlight of the video was the wrench (with my name on it).
Kidding aside, this is the best video that I have seen in a long time. Great work!
It sure is easier to put in the washers on the outside of the tub when the cabinet it removed. Even when using rubber cement to hold them in place, it was always a pain to get those bolts to go through the washers and brackets. I'm referring to Blackstones, of course.
I must share this video, to friends who are not members of this club.
eurekastar
Well-known member
Very nice! The 1812 Overture is a great touch too!
As an eBay Associate we earn from qualifying purchases.
mickeyd
Well-known member
It's a fookin' dreamscape, Dude. Unbelievable and mesmerizing to the point that I think I'm seeing things: Was there a shot of a pushbutton 900 or 906 somewhere in the vid? Many thanks for Herculean work, Eugene. Again, unbelievable and breath-taking!
Speechless!
Kudos to an amazing video and machine restoration! Am breathless with admiration!
Kudos to an amazing video and machine restoration! Am breathless with admiration!
vacman1961
Well-known member
Beautiful rebuild job, what do you sell a machine like that for in your store?
