Tonight, I ran the filter-flo pan and the dispensall tank/pan under the kitchen sink and cleared up any excess gunk that had softened in the tote. It is starting to look normal again!
More to come tomorrow.
More to come tomorrow.
Weren't we just discussing '74 GE's?
- Thread starter swestoyz
- Start date
Help Support :
applianceguy47
Well-known member
- Joined
- Mar 19, 2012
- Messages
- 590
OMG !
WTF ?
that dispenser looks like something dug out of a home flooded in the 1993 midwest flood.
I mean, I've seen hardwater build-up, but THAT.
Your doing the right thing with the soaking. and again, If THAT is your only problem (fingers crossed)
you would be very fortunate.
I, I'm sorry..
did we get the address where we can stop by sometime...
and take
a look at it.
I mean, when your home, of course. ah-hah.
And its Harvest Gold. The only dispensall I had was HG.
Has anyone ever seen one in coffee or Avacodo?
WTF ?
that dispenser looks like something dug out of a home flooded in the 1993 midwest flood.
I mean, I've seen hardwater build-up, but THAT.
Your doing the right thing with the soaking. and again, If THAT is your only problem (fingers crossed)
you would be very fortunate.
I, I'm sorry..
did we get the address where we can stop by sometime...
and take
a look at it.
I mean, when your home, of course. ah-hah.
And its Harvest Gold. The only dispensall I had was HG.
Has anyone ever seen one in coffee or Avacodo?
redcarpetdrew
Well-known member
Actually, this one IS avacado.
Don't worry about the basement. I have the Mission Impossible crew fresh from the CIA vault working on Ben's basement access. Wait, Ben's not actually reading this thread, is he? Ummm... Hey Ben, ignore that racket down there. It's only the rare Iowan Laundry Gopher. Not to worry! Ummmm, yeah...
RCD
Don't worry about the basement. I have the Mission Impossible crew fresh from the CIA vault working on Ben's basement access. Wait, Ben's not actually reading this thread, is he? Ummm... Hey Ben, ignore that racket down there. It's only the rare Iowan Laundry Gopher. Not to worry! Ummmm, yeah...
RCD
applianceguy47
Well-known member
- Joined
- Mar 19, 2012
- Messages
- 590
It's AVOCADO !!!
Holy S.......
I'm good. I'm calm. In fact, I wish you the best with your new toy.
It's, nice.
Shhh. Shhh.
Andrew, email me. Waterloo is 3 hr. and 12 minutes from me a bit closer than Reno.
I'm warming up the van, packing my tools, bringing an appliance dolly, my night surveillance binoculars, a stun gun, magic underwear (don't ask), and snacks.
Oh, and a camera and giant plotter printer.
Here's the plan. We'll take a picture of the machine where it sits now, print it out, remove the machine,
and hang the print out where the machine was. TEE-HEE !
He'll never know its gone. ROFL.
I'm GENIUS.
You two may be in luck - I sleep like the dead. 
Ben, I think the A-1 priority for my next "retreat/vacation" to Waterloo should be the installation of a Hi-tech security system for the basement. Maybe with Cory's help we can design a Rube Goldberg machine that will not only deter intruders but perhaps trap them in a humiliating way!
westingman123
Well-known member
- Joined
- Jun 24, 2009
- Messages
- 1,541
Ummmmm,
Pssst! Erik and Drew. Yeah, you! While the guru is asleep, couldja nab the Westy fridge? St. Louis isn't too far.
I'll brew up some fresh coffee and throw in home-made biscuits and gravy.
Deal?
Pssst! Erik and Drew. Yeah, you! While the guru is asleep, couldja nab the Westy fridge? St. Louis isn't too far.
I'll brew up some fresh coffee and throw in home-made biscuits and gravy.
Deal?
Something that works great on those holes of the filter pan is a power washer......cleans out everything perfect.....
wonderful machines Ben.....as always
wonderful machines Ben.....as always
What'cha need all this vinegar for? Cukes don't come in till August.
Wow - what a difference some pickling makes! Well water can be pretty scary from place to place out here, not surprising...
Wow - what a difference some pickling makes! Well water can be pretty scary from place to place out here, not surprising...
Here's the story -
The Dispensall set popped up on CL last week near the Quad Cities, but was originally advertised as just the dryer for sale. I contacted the seller and asked if they still had the washer. They did but a 'bearing' was shot and he didn't want to sell the washer with the dryer, but would be wiling to throw it in for free. He mentioned that the set had set unused for over 10 years as the wife died at the age of 82, and the husband had his daughter do laundry.
I made arrangements to pick up the set in Keithsburg, IL. A 6 hour round trip on the weekend isn't too bad. But after a day of work. UGH.
The Dispensall set popped up on CL last week near the Quad Cities, but was originally advertised as just the dryer for sale. I contacted the seller and asked if they still had the washer. They did but a 'bearing' was shot and he didn't want to sell the washer with the dryer, but would be wiling to throw it in for free. He mentioned that the set had set unused for over 10 years as the wife died at the age of 82, and the husband had his daughter do laundry.
I made arrangements to pick up the set in Keithsburg, IL. A 6 hour round trip on the weekend isn't too bad. But after a day of work. UGH.
The set is very pretty, and the dryer seems to work just fine. However, the couple lived about 2 miles outside of town, and operated as seed and feed sellers. To say the washer was full of hard water deposits is an understatement.
Washer Model: WWA8500PALAV
Washer Serial: LP126975G
Dryer Model: DDE9200PACAV
Dryer Serial: LP206516A
I'm taking a stab at June of 1975 for the MFG date, however I'm not as up to speed on GE's secret decoder ring as I am for other MFG's.[this post was last edited: 4/15/2012-22:57]
Washer Model: WWA8500PALAV
Washer Serial: LP126975G
Dryer Model: DDE9200PACAV
Dryer Serial: LP206516A
I'm taking a stab at June of 1975 for the MFG date, however I'm not as up to speed on GE's secret decoder ring as I am for other MFG's.[this post was last edited: 4/15/2012-22:57]
Shot with the lid open. One of the few issues with the washer is that the Dispensall door on the lid was broken off at some point. Not a huge deal. Just glad it wasn't tossed aside.
redcarpetdrew
Well-known member
Mmmmmmm... Biscuits and gravy... Sorry, Ben. Sold out for homemade biscuits and gravy...
;^)
RCD
;^)
RCD
Detailed shot of the filth. YUCK City.
Tub shot. The tub seems to be in decent shape, with the extra dealer added option of heavy hard water staining.
Again, YUCK.
The bad 'bearing' the seller mentioned was the funnel scrapping on the top of the wash basket.
The bad 'bearing' the seller mentioned was the funnel scrapping on the top of the wash basket.
This should look sweet once the clean-up crew comes in and finishes it up!
Now, I wasn't overly disappointed nor surprised when I popped the top. If it would have been mint, then I would have been jumping for joy. It seems grandpa did some handy work at some point and siliconed the top. Too bad he didn't know to use a putty knife to push the latches in on the porcelain top...
Instead I have more hours of fun hard water chiseling to do. Didn't I just get done doing this for the platinum Whirlpool?
Mechanically it performs wonderfully. The clutch sounds great.
Instead I have more hours of fun hard water chiseling to do. Didn't I just get done doing this for the platinum Whirlpool?
Mechanically it performs wonderfully. The clutch sounds great.
Close-up of the NASTY looking diverter.
mickeyd
Well-known member
Good Lord, Ben
You've got a mummy on your hands. Call Boris Karloff.
You've got a mummy on your hands. Call Boris Karloff.
Here are the two pressure lines running to the diverter, which provide the signal to shoot left or right. No signal shoots to the center. More to come on how this works once the resto is complete.[this post was last edited: 4/15/2012-23:15]
All in all, this is a very cool set and I look forward to working on them. However, the Dispensall set may not always live in Waterloo.
At the moment I'm super busy right now with work and other planned activities, so I won't be able to tear into this anytime soon. However, once it is done I'll do a complete write up, as the Dispensall system truly is very, very cool.
Ben
At the moment I'm super busy right now with work and other planned activities, so I won't be able to tear into this anytime soon. However, once it is done I'll do a complete write up, as the Dispensall system truly is very, very cool.
Ben
WOW
The way you do things these machines will look like new when you're finished.
Congratulations Ben! Thanks for the photos and the time it takes to post them.
Patrick
The way you do things these machines will look like new when you're finished.
Congratulations Ben! Thanks for the photos and the time it takes to post them.
Patrick
Nasty looking crud. My sisters well water does pretty much the same to her dw and washer. They also have a lot of sulphur in their water (it really stinks) so I wonder if those folks had it as well. We never had problems with our well-water that a simple iron filter didn't fix.
First of all: WAY COOL MACHINES! How lucky that it was just the funnel scraping the wash tub and not actually a bearing.
Being a "Newby", I'm assuming that the Dispensall was the TOL of the GE product range? It certainly looks like a seriously major machine. How much more costly were these than your MOL GE model?
Being a "Newby", I'm assuming that the Dispensall was the TOL of the GE product range? It certainly looks like a seriously major machine. How much more costly were these than your MOL GE model?
applianceguy47
Well-known member
- Joined
- Mar 19, 2012
- Messages
- 590
ehhhhh, They're ok (Markus Bachman SUPER !).
I wonder what the seller was going to do with the washer? Just think, he could have decided to call someone and pay them to take "junk" away.
You did <span style="text-decoration: line-through;">really good </span> alright.
Being that your so busy, and may possibly need the floor space, I ,
wow, I could volunteer to drive there and, take those off your hands. You wouldn't even need to pay me.
I just have to get the recently deflated tire on my van changed, first.
Oh, and I've heard that GEs and Westinghouses, once together in the same room, should NEVER be separated. So, If you happen to have anything with a Westinghouse logo, I should probably take them, you know, as a happy family.
I wonder what the seller was going to do with the washer? Just think, he could have decided to call someone and pay them to take "junk" away.
You did <span style="text-decoration: line-through;">really good </span> alright.
Being that your so busy, and may possibly need the floor space, I ,
wow, I could volunteer to drive there and, take those off your hands. You wouldn't even need to pay me.
I just have to get the recently deflated tire on my van changed, first.
Oh, and I've heard that GEs and Westinghouses, once together in the same room, should NEVER be separated. So, If you happen to have anything with a Westinghouse logo, I should probably take them, you know, as a happy family.
8 cubic foot dryer
I did not see it mentioned in the thread, that dryer is the 8 cubic ft capacity.
I did not see it mentioned in the thread, that dryer is the 8 cubic ft capacity.
