Children and sensitive viewers are encourage to cover their eyes as they may find the following image distressing 
(TRIGGER WARNING)
(TRIGGER WARNING)
When did Maytag start to go bad?
- Thread starter whirlpool862
- Start date
Help Support :
vacerator
Well-known member
True, but sexy and stylish has always sold well.
Children and sensitive viewers are encourage to cover their eyes as they may find the following image distressing
(TRIGGER WARNING)
View attachment 318074
Okay I'll bite, what exactly is wrong with those GE electric pumps? I've used them for decades in my custom builds and not one has ever failed on me. I've even run them for 15 to 20 minutes at a time for recirculation without any issues, although they are not suppose to run for that long without a rest.
The Hanning Elektro-Werke pumps are good, they got all the bugs worked out. It is was original Italian pumps that were junk however, they are very noisy and loudly gargle at the end of drain. They vibrate and are very poorly balanced causing anything its mounted to rattle and vibrate. Garment fibers / lint would get wrapped up around the impellers and bog down the motor. They frequently leaked with time due to the weak shaft seal. If anything hard got caught in the pump the impeller would just break. I can think of a dozen other pumps that are much better designed and much better suited for a washing machine.
I know you've used some of these, they are great for the cost and personally what I would recommend if looking for an electric drain pump:
https://mccombssupply.com/wh23x1001...MI2K-4g_yRjwMVb0JHAR1jSTRUEAQYASABEgKOSfD_BwE
The one you linked are the ones I've generally used. I believe I only have one pump with an external fan like in the image you show, although I've had no issue with it as well.
I'd change that one Italian pump to a Hanning, however considering its only one pump and the washer is what I assume low use you could just leave it as is.
I've updated that thread with all the images properly inserted as I see it didn't make it through the conversion to the new site...
https://automaticwasher.org/threads...ouping-up-a-1970s-helical-drive-maytag.79805/
https://automaticwasher.org/threads...ouping-up-a-1970s-helical-drive-maytag.79805/
Iāve used the T model and newer GE top load washer pumps in a lot of things as well. They have worked very well. I donāt recall every single one fail.
The bad ones were the ones you pictured with the fan they had a shaft seal that would fail and caused the bearing to lock up. The fan itself would also come off sometimes it was just pressed onto the motor. The motors on those got so hot that the fans would just fall off youād find them in the bottom of the machine.
John L
The bad ones were the ones you pictured with the fan they had a shaft seal that would fail and caused the bearing to lock up. The fan itself would also come off sometimes it was just pressed onto the motor. The motors on those got so hot that the fans would just fall off youād find them in the bottom of the machine.
John L
It's only getting worse each and every day.
phillymatt53
Well-known member
It seems like the teens, the younger crowd, has been a major issue here in Philly.
And...... throughout the USA.
Oh I think the adults said the same thing about us when WE were teenagers back in the 70s.
As for Maytag, they probably should not have bought Magic Chef and should have been like a Speed Queen and just made washers and dryers.
As for Maytag, they probably should not have bought Magic Chef and should have been like a Speed Queen and just made washers and dryers.
phillymatt53
Well-known member
Yes, but today's youngsters are much more troublesome - and deadly.
