Whirlpool Dryer Rescued from the Scrap Metal Yard.

[Ultramatic]

Nah, here's the vid...

<span style="font-size: medium;">Runs smooth and QUIET. </span>
 
<iframe width="853" height="480" src="" frameborder="0" allowfullscreen></iframe>

 

[combo52]

New Motor and pulley in a Compact 24" WP built Dryer

Nice installation job Louie, it does appear in in your pictures that the old and new motor pulleys are about the same diameter. After you get these machines running check the RPMs of the drum and compare them to the other dryer and more importantly with a real load of laundry run the dryer with the door open both at the beginning of a drying cycle [ wet clothes ] and at the end of a drying cycle when the clothing is dry and see if you are getting the correct tumble patterns. If the drum is tumbling too fast it can result in slow drying and wrinkled clothing.

 

[Ultramatic]

Thanks for the advice John...

<span style="font-size: medium;">Hopefully I'll be finishing up the Kenmore tomorrow.
</span>

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

New and old blower wheels.

 

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

Perfect fit!

 

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

The Demon Buzzer

 

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

Buh-bye buzzer!

 

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

<span style="font-size: medium;">YIKES! This is serious!</span>
 
<span style="font-size: medium;">
</span>

<iframe width="853" height="480" src="" frameborder="0" allowfullscreen></iframe>

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

<span style="font-size: medium;">First drying test, 3 wet towels. Tumbling seems OK. </span>
 
 
<span style="font-size: medium;"> </span>

<iframe width="853" height="480" src="" frameborder="0" allowfullscreen></iframe>[this post was last edited: 5/22/2013-00:33]

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

<span style="font-size: medium;">Test drying of towels, now dry. </span>
 
<span style="font-size: medium;">
</span>

<iframe width="853" height="480" src="" frameborder="0" allowfullscreen></iframe>
 

 

[Ultramatic]

Final Kenmore Dryer Reassembly:

<span style="font-size: medium;">Final video before closing it up. </span>

<iframe width="853" height="480" src="" frameborder="0" allowfullscreen></iframe>
 
 

 

[Ultramatic]

Kenmore All Done!

 

[Ultramatic]

Kenmore All Done!

 

[Ultramatic]

Kenmore All Done!

<span style="font-size: medium;">Ready for service!</span>
 
<span style="font-size: medium;">
</span>

 

[maytog77]

huh......

I have a Kenmore thats even diffrent than that. Mine, according to my catalog is from 1978. I only paid $9.99 at a local trift store...=)

 

[Ultramatic]

Sure is purdy Jason!

<span style="font-size: medium;">Have you done any work on it?</span>

 

[Ultramatic]

All Done!

<span style="font-size: medium;">Today it goes to it's happy, new home! </span>

 

 

[Ultramatic]

Don't want to start a whole new thread for this...

 

 

<span style="font-size: medium;">The </span><a name="start_45817.674836"><span style="font-size: medium;">Lady Kenmore Compact Dryer, Mod. # 110.88090800 has stopped heating. Everything else works fine. Any suggestions where to look first?
</span></a>