Your ONE-SIDED Wash Loads

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

More AMKrayoKoaching:

Well, okay, here is a full load with a different detergent with the water level set where I’d left it, and this soap is cheap stuff from Walmart...

Also using warm water for the wash, mommy and baby’s stuff (which will be an Always) with “something” (Ahem!) added in...

— Dave

daveamkrayoguy-2019110710200102097_1.jpg

daveamkrayoguy-2019110710200102097_10.jpg

daveamkrayoguy-2019110710200102097_11.jpg

daveamkrayoguy-2019110710200102097_12.jpg

daveamkrayoguy-2019110710200102097_13.jpg

daveamkrayoguy-2019110710200102097_14.jpg

daveamkrayoguy-2019110710200102097_2.jpg

daveamkrayoguy-2019110710200102097_3.jpg

daveamkrayoguy-2019110710200102097_4.jpg

daveamkrayoguy-2019110710200102097_5.jpg

daveamkrayoguy-2019110710200102097_6.jpg

daveamkrayoguy-2019110710200102097_7.jpg

daveamkrayoguy-2019110710200102097_8.jpg

daveamkrayoguy-2019110710200102097_9.jpg
 
Hi Dave,

Ignoring the surface dirt on the machine, is that Mould/black slime poking out between the Plastic tub ring and the top of the washbowl? If you scrape it with a fingernail, does it come off?

How hot is your hot water? Is it 140deg in the Laundry or only 120 because you have a small child? If a tear down isnt on the cards, I would fill the machine with 140deg water (You might need to turn the thermostat up on the tank for 3-4 hours before you fill), add a two to three cups of pool chlorine, let it agitate with the lid up until it would normally drain and then leave it sit overnight. I would use a bucket or a hose to add hot water to just barely cover the top of the washbowl. Dont get the water level that high that it touches the plastic tub ring. Make sure there are no clothes nearby when its washing as splashes will damage the fabric.

Restart the cycle to the begining and let it run all the way through with an extra rinse, and then wash a load of rags with regular detergent. You'll probably find the rags come out covered in black/brown specs, which is the mould and slime from the outer tub.

If that black stuff on the top of the bowl doesnt scrape off, then I apologise.
 
I agree, how do you expect the clothes to come clean when the machine is dirty. Wipe down the bleach dispenser, lid opening and tub ring to remove all the crud. I usually do this to mine every month or so just so nothing gets built up. If you take care of your machine, it will take care of you!
 
Extra rinse needed?

Then it's so ordered:

Anyway I've seem to have followed nearly all advice here, I have refrained from being near the machine at or during any of its draining periods, and no unbalanced loads, either...

I think the laundry comes out satisfactorily but if not, then I will try the rag test that brisnat81 recommended...

I think despite the results of using my washer cleaner being embarrassingly as the machine was before, I did okay, other than, perhaps I should have rubbed that dirty spot with a rag during that washing, then...

So, thanks, then, and I will see if I can someday attempt to dismantle my entire unit and hopefully get her back together again and running as perfectly and better...

-- Dave

daveamkrayoguy-2019110723405809123_1.jpg

daveamkrayoguy-2019110723405809123_2.jpg
 
 
Still more water than necessary.  Your loads aren't as large as you think.  Rapid, frantic rollover is overrated, with items spending mere seconds at a time at the oscillating lower fins, compared to a leisurely roll having the items spend a minute or even a couple down there before moving on up.

The little load pictured above, the lowest level or a little more, maybe 9:00 to 9:30 position, is sufficient.

Sun, Xtra, and other low-cost liquid detergents have a larger proportion of water in the formula ... adds volume and reduces the concentration of cleaning ingredients (lower production cost).  Low-cost powders have a lot of washing soda (sodium carbonate) which can contribute to harsh-feeling fabric.  These products also may have only one type of enzyme or none at all.

Pinol Ensueno powder has no enzymes.
- Sodium Sulfate (filler), a sodium salt of sulfuric acid
- Sodium Alkylbenzene Sulfonate (cleaning agent), an anionic surfactant
- Sodium Silicate (builder), composed of quartz sand and soda ash, aka water glass (soluble in water)
- Sodium Carbonate (builder), an alkaline sodium and carbon salt, aka washing soda
- Active Poly Sodium Metasilicate (builder), a non-phosphorus detergent/water softener
- Fragrance
- Disodium Distyrylbiphenyl Disulfonate (optical brightener), a dye that absorbs UV light and reflects blue light

Does someone in the household have skin sensitivity such that you can't use enzyme detergents?

Witness the gray scum-line on your agitator ... that's scrud (combination of laundry soil and mineral content from the water) that isn't held suspended in the wash water to be flushed away, and thus sticks to the agitator (and the basket) at the water line. This occurs with low-quality detergents (not handling the water conditions and soils), and too-low of detergent dosage can be a factor.

What you see on the surface *may* (or may not) be much worse accumulation on the outside of the basket and inside of the outer tub, where it can't be seen without disassembly.  Although that's not unusual for the typical washer.  The outer tub is translucent so scrud/gray/black residue sticking to it can be seen if the outer cabinet is removed ... if you're up to doing that.

Consider Arm & Hammer, All, Gain, and Tide Simply Clean (yellow bottle).

Good Housekeeping 2019 Best Detergents

If you want some extra rinsing without involving the full 2nd/Extra Rinse option, run the Perm Press cycle.  It adds a partial-drain and refill for the cool down before the first spin, which also functions as a sort-of rinse.

This is a perfectly fine leisurely rollover at low speed (not ex-low).  Set of sheets plus a bedspread.  Everything moves down, spends plenty time at the fins where the cleaning takes place.  High speed of course would be more aggressive and/or the wash time could be longer at 14 or 16 mins instead of 12 mins, but not really necessary for the load.
 
Fighting for the Underdog Detergents!

Yes, for what the “budget brands” I had bought such a slew of could forge into the usual competition of Tide vs. Gain, of which, one and one only, ferret out just one scent!

No, no detergent allergies, and as for water level, I will be continuously clueless where to set until I buy one of those fancy, new-fangled front loaders that just automatically set the right one for you...

Now let’s go out washer shopping and bring back the days of the Westinghouse slant front, as in the 21st century (LG, Samsung, or Haier?) answer to...

— Dave

 
Okay, need to bath linen and other miscellaneous towels? Can my little washer do all this:...?

Where should the water level be set at? I want the load to be good for washing it in, as well as good for itself...

Operator is standing by...

— Dave

daveamkrayoguy-2019111107253507484_1.jpg

daveamkrayoguy-2019111107253507484_2.jpg

daveamkrayoguy-2019111107253507484_3.jpg
 
I'm assuming those are two different loads of towels because of the color grouping.  Each of those two loads would be full enough.  Put water level on highest water level.  Are you going to use the sturdy/heavy duty agitation of Normal/Fast or the Regular speed setting of Slow agitation/Fast spin?  
 
 
Dave, your washer isn't as "little" as you seem to believe.

There's no need to split that into three loads.

Bit tricky to judge the size of those towels but this (white outline) probably constitutes a full load.

That other little pile looks like kitchen linens?  I'd put the dark piece(s) with the other piles and either 1) wait for more white kitchen stuff to accumulate, or 2) if the stuff is urgently needed, go ahead and do it (SMALLest load, which it's not even that), WITH bleach.

The best way to get a consensus opinion on your load size / water level selection is take a video of the machine washing and post it to YouTube so we can SEE how it's operating.

dadoes-2019111111372403418_1.jpg
 
Oh my...
It`s not that difficult to set the correct water level in a TL.
First you drop your clothes loosely and unfolded into the tub. Then you press them down with your hands, but not too hard.
Next you fill the washer at maximum load setting and keep a eye on the water level.
As soon as your clothes are completely covered with water (or maybe an inch or two more for good measure) you slowly turn the water level selector towards the small size setting until filling stops.
Now you have the perfect setting for your load size. You`ll learn and adapt quickly and soon you`ll find the perfect setting without any guesswork.

Towels BTW are usually color fast and unless they are brand new or white there shouldn`t be any need to separate them by colors.
 
A steam cleaner there would make wonders.

I don't understand why keep the washer so dirty after so many people mentioned it.

If it was me, I'd immediately manicure it and post a picture of it pristine.

I didn't really understand why (maybe you explained it before but I didn't have the chance to see it) but i'm sure you have a good reason to have all those writings and stickers on the control panel.
 
Well, that small pile of clothes shouldn’t have gotten circled... Those are my wife’s and daughter’s that weren’t going to be included...

The washer filled and started agitating in no time, so I hope I’m getting this right...

Okay, if I can find something to wash that agitator that will actually clean it and the rest of the surroundings and can take the time, then I will...

So here are those two piles of bath linens I had to quickly do, as I have to work today, and want to get my work clothes done next:

— Dave

daveamkrayoguy-2019111207391707694_1.jpg

daveamkrayoguy-2019111207391707694_2.jpg

daveamkrayoguy-2019111207391707694_3.jpg

daveamkrayoguy-2019111207391707694_4.jpg

daveamkrayoguy-2019111207391707694_5.jpg

daveamkrayoguy-2019111207391707694_6.jpg

daveamkrayoguy-2019111207391707694_7.jpg

daveamkrayoguy-2019111207391707694_8.jpg
 
Oops, missed the Rinse! The load is actually done:

And that third pile of linen will go back in the basket and wait for more to accumulate...

(Yes, the washer had to be a Kenmore (house came with) and if so, I wanted a LETTERS machine!)

— Dave

daveamkrayoguy-2019111207434306650_1.jpg

daveamkrayoguy-2019111207434306650_2.jpg

daveamkrayoguy-2019111207434306650_3.jpg
 
Work clothes, consisting of a company-logo’d polo shirt, long sleeve shirt to wear underneath it, apron, and a pair of jeans:

These are washed on the rarely-used Hang Dry (fast agitation, slow spin) and in Cold...

And, it, too, started in no time!

(Note new water level setting)

— Dave

daveamkrayoguy-2019111207533401510_1.jpg

daveamkrayoguy-2019111207533401510_2.jpg

daveamkrayoguy-2019111207533401510_3.jpg

daveamkrayoguy-2019111207533401510_4.jpg

daveamkrayoguy-2019111207533401510_5.jpg

daveamkrayoguy-2019111207533401510_6.jpg
 
Back
Top