The tub doesn't appear to be spinning during the agitation cycle. And hints on how to check if the brakes need replacing?
Did you check that with a very full wash load? A small load might not cause the issue to show up.
The tub doesn't appear to be spinning during the agitation cycle. And hints on how to check if the brakes need replacing?
"These boots are made for walkin', and that's just what they'll do..."Is there any washing of shoes involved?
A different issue, since many repairmen on this site state issue with detergent or softener buildup, I was trying to remove my agitator and check. How do you remove it. I just tried to pull it offAfter flawless service for over 10 years the 4 fins on the agitator in our Speedqueen heavy duty washing machine broke off, one after the other. We replaced them and, in less than a month, all four were gone again. Cheap replacement we thought and got another. The fins are bent and almost broken after less than a week. Has anyone had this problem and does anyone have any idea what is causing it? Any thoughts gratefully received. (note: the image shows the bent fins and the break line.
View attachment 72661
This is exactly why I recently modified my Maytag to provide a warm spray and rinse!Cleaning under a top load washer agitator
If you’re using proper washing techniques, it’s unlikely there’s anything under the agitator. Yes, we’ve all seen horribly abused misused washers that had gunk under them.
Keep in mind there is no such thing as detergent. Buildup detergent will dissolve as easily as a teaspoon of sugar in a hot cup tea. What people often refer to as detergent buildup is mineral deposits from lack of detergent and hard water.
It’s also possible to get some buildup of fabric softener residue again from poor washing procedures if you’re using Fabric softener, it’s imperative to use plenty of detergent and warmer or hot water. The next time clothing is washed. We find you cannot use fabric softener if you’re doing all cold water washing and not have a problem eventually, both with the buildup in the machine and your clothing itself becomes skanky..
John L