Did you check that with a very full wash load? A small load might not cause the issue to show up.
Agitator fins keep breaking on Speedqueen top loader.
- Thread starter Museumtech
- Start date
Help Support :
Did you check that with a very full wash load? A small load might not cause the issue to show up.
Broken flex fins on top load agitator washer agitators
This is a problem that is seen occasionally on many different top loaders I have seen turquoise Maytag power fin agitators with a broken fin or two as well.
The best solution is just not to have a top load washer, however, occasionally some of the cheaper front load washers will break a baffle out of the drum as well.
John L
This is a problem that is seen occasionally on many different top loaders I have seen turquoise Maytag power fin agitators with a broken fin or two as well.
The best solution is just not to have a top load washer, however, occasionally some of the cheaper front load washers will break a baffle out of the drum as well.
John L
IMHO the washer is either very, very overloaded or the water level is to low for the load.
Had a SQ AWN432 for 7 years and never had to replace the flex fin.
phillymatt53
Well-known member
Oh, a hint.....
If washing anything with a zipper, like jeans, jackets, etc., zip them closed before loading them, particularly if the load contains other articles.
Those open zippers can catch on fabrics and cause issues or tears during washing.
Yep, it's happened to me until I learned.
If washing anything with a zipper, like jeans, jackets, etc., zip them closed before loading them, particularly if the load contains other articles.
Those open zippers can catch on fabrics and cause issues or tears during washing.
Yep, it's happened to me until I learned.
Anything with zippers will usually turn inside out also to help prevent nicks in the agitator
