2018 Speed Queen topload models

[Chetlaham]

Does anyone have information about these or when they will be released? I've been dieing to know more about them. Being Speed Queen I have a feeling I will be very impressed. I've been looking through their patents and they are taking this very seriously.

 

[lorainfurniture]

Word around the campfire

It is going to have a lid lock, that locks only during spin. It’s likely going to have a bldc motor instead of a traditional split phase motor.

 

[Chetlaham]

Lidlock

Darn... Any idea when its being released?

 

[agiflow2]

It's a shame that there will be a lid lock. Personal responsibility must be out of style completely nowadays.SMH

 

[frigilux]

Glad both my sister and I have 2017 sets! Employed the couldn't-be-easier lid switch hack on both washers. Wonder if the 2018s will have a neutral drain, as do SQ's in other parts of the globe?

Improvements I'd like to see on SQ top-loading washers:

1) Separate temperature for soak/prewash and main wash cycles. I like to soak loads of heavily-stained kitchen whites in lukewarm water, then wash in hot. Can't do that automatically with current SQs.

2) Detergent dispenser. This would come in handy when using the soak/prewash options. FAQ at the SQ website said, "Since the machine spins out water from soaking but does not rinse, there is enough detergent left in the clothes for the main wash."  Really?  Why, then, is there almost no detergent left in the rinse after the first spin of a regular cycle? Face it; one needs to return to the washer to add a second dose when machine advances to wash fill.

 

3) Timed bleach and fabric softener dispensers. Bleach should be added the last 4 minutes of the wash portion of a cycle; not during the soak/prewash or at the start of the cycle.  Those stain-eating enzymes in today's detergent need time to work before bleach is introduced.  Currently, you can't use fabric softener if you choose soak/prewash options because it will be dispensed into the main wash water.  Likewise, softener is wasted if you choose an automatic 2nd rinse, because it would have been dispensed during the first rinse.

 

Was impressed that SQ added cycle flexibility and other cycle-oriented features to their series 9 machines a couple of years ago.  Unfortunately, they didn't add the infrastructure (so to speak) to support those features.

[this post was last edited: 10/8/2017-06:00]

 

[agiflow2]

And while they are at it how about porcelain tops and lids and zinc coated cabinets.

If Maytag sold their DC washers today, I don't think they would fetch the prices these machines do and you would get more for your money,..but we should just be thankful there is at least one maker left who still makes a traditional agitator washer.

 

[Chetlaham]

@agiflow2: Here is the thing, unless the law changed they can easily rid of the lidlock by using DC to brake motor. GE did this with their hydrowaves and it worked very well.

 

[yogitunes]

Eugene....

I get the detergent dispenser concept, wanting them on all machines as well....

but for times when there is not one, when adding the prewash/soak to a cycle, you are to add double the detergent at the start....

this was very effective during the belt drive years of Whirlpool's 'SuperWash'...although this only offered a short soak and a partial drain, then refilled for the main wash....

even my 1985 FilterFlo with the 'Extra Cleaning Cycle' recommends the high concentration of detergent, only one main wash for this, but two complete spin sprays and rinses follow to remove all the detergent....

 

[mtn1584]

Will they still fill to the top of the tub with water and have water level selections?

 

[agiflow2]

Didn't the original F&P based cabrio washers use the motor to slow the tub down ?

 

[appnut]

Eugene, I have a possible solution to the detergent dispensing issue with using soak/prewash and then programmed to go into the main wash.  Maytag offered a solution back in the day when they first offered this feature.  What about using the FS dispenser as dispenser for liquid detergent for the main wash?  Although I'm not sure the FS cup could be removed for easy cleaning as was the case for Maytags.

 

I think John has already stated the new 2018 models will also do a neutral drain like is done in other parts of the globe.   

 

[combo52]

2018 SQ Top Load Washers

We are going to service training on these in the next two weeks and will report back what we learn.

 

I am hoping for neutral drain as we are running quit a few service calls on the current TL machines with out of balance and machine walking complaints when users use too much water for the load being washed and the load goes out of balance, this was always a big part of the vibration complaints we got with MT DC machines.

 

I do hope they do not go to a lid lock, consumers do not like lid locks.

 

I would like to see in the new TL washers, dual action agitators, neutral drain and slightly bigger holes in the bottom of the wash basket, Porcelain tops on W&Ds on high end models, and better dispensers for bleach and detergent and maybe detergent as Eugene mentioned.

 

Overall it will be interesting, I have said for years that I would never have any interest in owning a current SQ TL washer, it is simply too crude, it is better than a MTDC washer in several important aspects, but the class act is a SQ FL washer, the FL SQ has over twice the life expectancy and just does a much better job.

 

If the MT DC washer was still in production and offered a 5 year full warranty it would cost every bit of $1000.00

 

John L.

 

[henene4]

Lid lock

If its a quick unlocking system (not the bimetalic ones which take ~2 minutes to unlock) and is only active during spin portions (which by the way are all verry easily achieved things), I'd guess most wouldn't mind it verry much.

I am curious how and if they will achieve more economic operation. I'd hope for a recirculation system for a F&P EcoActive kind of wash process and a good spray rinse operation.
Actualy always wondered why none of the HE TLs would use a recirculated spray rinse system. Just fill with a gallon or two, kick on the recirculation and let the tub spin at variable speeds anywhere from 50-250rpm, for a few minutes, then drain, spin at high speed. Repeat 3-4 times. Could even be used for softner application that way. Or could enable quick and efficent sanitize options in TL if a heater was integrated.

Also hoping for higher spin speeds. If they (finally) switch to an inverter based drive unit they could achive verry precise OOB checking and thus enable spins comparable to the Unimatic.

 

[pumpkina]

Thanks, John L.

You wrote that SQ TL "is better than a MTDC washer in several important aspects, but the class act is a SQ FL washer, the FL SQ has over twice the life expectancy and just does a much better job."

In what ways is the SQ better than the MTDC (Dependable Care?)

I thought that all front loaders suffered an inherent design flaw of having the central bearing arm (spider arm?) being the weak point, having to fight gravity ultimately unsuccessfully to spin clothes. What did SQ do to solve this problem?

Finally, I've read in general to avoid washers and dryers with electronic control boards due to their vulnerability to moisture, ease of damage, and expensive repair. What are you thoughts about SQ washers/dryers with electronic controls?

Thanks

Thanks

 

[lorainfurniture]

Short of getting the board wet, the speed queen control boards are nearly indestructible. Their rear main bearings are very robust, so they fail very infrequently. When it does fail, it’s a pretty easy repair.

 

[agiflow2]

I can see having bigger holes on the bottom of the washbasket, but a dual action agitator ? This machine needs no such agitator. The flexvane works perfectly just the way it is. I am able to make full use of the basket and get good turnover. The last thing we need are more dual action agitators.

 

[thomasortega]

Bigger holes on the bottom.... for what? to extract LESS water during the spin?

Gosh, I thought Speed Queen designers had much more technical knowledge than I have...

 

[agiflow2]

The Speed Queen i have AWN 432 could definitely benefit from some improvements. I wish these machines were better at rinsing for one and that they had at least 2 spray rinses for each spin. One 15 second spray simply does not cut it. It is Ok or permanent press but heavy cottons and towels forget it. I need three rinses.

 

[agiflow2]

"Bigger holes on the bottom.... for what? to extract LESS water during the spin?

Gosh, I thought Speed Queen designers had much more technical knowledge than I have... "

Seemed to work for WP/KM all those years regarding sand removal.