A Cavalcade of WO-65-2 Unimatics - Part III

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

Unimatic1140

Administrator
Staff member
Joined
Apr 26, 2001
Messages
9,932
Location
Minneapolis
Tonight I changed the spin bearing located in the upper mechanism housing, check the oil and gave the mechansim both a bench and in machine test. Everything so far, so good...

7-14-2005-22-02-44--Unimatic1140.jpg
 
YAY, very nice! My GE spins in the 600's (not sure what the actual speed is) and makes quite a gust when I ran it with the top off...so I can imagine 1140!

What happened to the missing pulsator shaft...I notice 2 on each mechanism? Was it just removed from the mechanism?
 
Hi Austin, the mechanism on the right has been there for over a year, its not the same mechanism that had the pulsator shaft broken off. That one is sitting on the floor over a coffee can at the moment dripping out every last bit of oil. Next week after I have this machine up and running I will break the bad tranny and see what's going on in there.
 

Latest posts

Back
Top