Cold-Water Washer by Whirlpool

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

Problem Solved

You would just need to hang around for the wash fill to complete

wes.com/pd/EASTMAN-12-in-L-3-4-in-Hose-Thread-Inlet-x-3-4-in-Outlet-Rubber-Washing-Machine-Connector/3546270?cm_mmc=shp-_-c-_-prd-_-plb-_-google-_-lia-_-208-_-supplylines-_-3546270-_-0&placeholder=null&gclid=CjwKCAjw_Y_8BRBiEiwA5MCBJskZ4pCU-FeY0nrxy29YunN
 
Reviews on this washer are funny

Like lakewebsterkid stated above. Here are a few:

Great Features, NOT: Whirlpool Top Load Washer
Did not ever fathom despising a washing machine; purchased this six months ago, six months of misery with this thing, and I have used possibly/probably hundreds. This thing will give you pain and frustration as well as hard work (get a board and go to the river!)
Six months hence, "take it away" and also dryer although dryer is Fair to OK but want matching set; back to GE and FAST! Getting to be an expensive endeavor, but I could abide this thing NO longer!
*******************************************************************

I am wasting my TIDE!!!
I am very disappointed in the performance of my new low- water washer!!! I just purchased this supposedly high Efficiency washer and i am working harder than my great grand mother to get the soap out of the dry cloths!!! And this is after the cycle is over!! I should be able to load the cloths the way the manufacturer tells me to, use the proper expensive detergent that is recommended for said product and wait for my clean cloths to come out to dry!! Instead i am working harder to wash cloths than i ever had to in my life$! It is very upsetting when you are expecting clean cloths but you receive cloths that was never touched by water!!! I shouldn't finish a cycle with detergent on my cloths period!!! Bad products!!! Never again!!!
******************************************************************

very disappointing - hunk of junk
I bought this washer a few months ago for a rental. Between renters, I am testing it. It makes terrible sounds like it is broken. It does not allow enough water to go in to rinse clothes properly. It does not distribute soap properly clothes comes out with spots of soap on it. I wish I had my old washer back.
*******************************************************************

Not happy
We have had this machine for 3 years and it hasn't lived up to the expectations of a Whirlpool product. In the 3 years of ownership, the appliance repair people have been to our residence an average of twice a year. Most of the repair work has been to replace the motherboard that control all of the operations of the machine. They were out here today to fix the problems again and told us the repairs this time would be over 500 dollars. We are going to find a new machine to replace it; it won't be a Whirlpool.
******************************************************************

The nub they call an agitator
I moved to an apartment with all whirlpool appliances. The washer doesn't get but a trickle of water in it and they put a little nub in the bottom for an agitator then say don't cover it ...serious ..the only way to not cover it is do 3 pairs of socks a load only. the dishwasher doesn't wash dishes either.
***********************************************************************

I included Whirlpool's response to this review. They actually suggested balling the clothes up to the size of a soccer ball before placing into the washer.

Horrible washing machine!
Water level doesn't even cover one load of sheets on the "sheets" cycle! If water doesn't fill in time, the cycle times out and then the cycle stops and you have to restart this stupid machine. Takes a good hour to wash a load of clothes.

Response from Whirlpool:
Social Care Team · 2 years ago
The Department of Energy standards state how much water any water-based appliances can use, and our washers meet all of their stringent guidelines. We would recommend balling up the clothing similar to the size of a soccer ball, and place around the agitator one at a time. We would also recommend stacking it up so it is around the sides and the agitator plate is visible with all of the clothing around it. Do not fill up past the 2nd to last row of holes in the basket to help avoid overloading. The bulky cycle will allow more water to enter the tub, but will not spin on the highest spin setting. We hope this helps.
 
Whirlpool would be much better off if they started making machines like my 1963 RCA Whirlpool Imperial Mark XII set tomorrow and discontinuing ALL of their HE machines. There wouldn’t be much complaints about the wash performance in older belt drive design and customers would be much happier with a machine that actually cleans and does what is supposed to do as opposed to their newer HE machines and yes it would be more expensive to build machines like my ‘63 Whirlpools but again customers would be much happier with having a machine that actually washes and rinses like it’s supposed to do.
 
The good 'ol machines are never coming back due to cost, weight, materials, labor, and government regulation. Go out and rescue those orphans as they become homeless.
 
Unfortunately consumers and customers are too cheap to pay for quality these days but I’d bring back the old school Whirlpool belt drive washers if I could but I’d make them in limited numbers so the dumb EPA and DOE can’t say anything.
 
cold water subject

And while we are still on this subject, energy star is going to be reinforced, count on it. I have a feeling that the cold wash agenda is going to be pushed even more. It's bad enough that everything is being treated with a gentle wash action, even with the machine being placed on normal or heavy duty and deep rinse, on top of low water level washing.
 
Americans Need To DITCH The Top Loader & Move To Front Load

Americans need to end their love affair with top loaders already.
The days are over of being able to fill up a huge tub of HOT water and getting your clothes clean in 30/45 minutes.
Now we have so many states with drought conditions that we really need to use less water.
A front loaders just makes sense. Europe has been using them for like ever and they work.
You can't wash everything in COLD. You actually need HOT and WARM water washes to clean/lift dirt, oil, sebum etc.
Europe doesn't use exclusive COLD water washes.
Educated use is all it takes. Use HOT on whites (and maybe some bleach) to keep your clothes AND machine clean.
My 7 year old Electrolux Wave-Touch (70 Series) washes great and has no foul odor at all.
I use HOT washes for whites with bleach and borax. Colors get Eco-Hot (warmer than warm but not full hot) or Warm.
When washing is done for the day, wipe down boot (door and gasket) leave door open, wipe down detergent drawer and leave open.
And when the washer calls for a Clean Cycle (every 50 washes), I do it.
Maybe I'm pro-front loader because I grew up with a Westinghouse front loader (that even used more water than today's front loaders) but still used WAY less than any top loader of that time.
Front loaders just make more sense.

georgect-2022071111071008811_1.jpg
 
TBH I don't like cold water washing. My F&P TL fills a little with warm or hot water and then cascades the concentrated hot/warm sudsy water over the load with the tub slowly rotating for about 5 minutes. It then fills up with cold to agitate. Always get great results.

In Japan they seem to exclusively use cold water washing. Their machines (mostly TLs) only have one fill hose for cold fill.
 

Latest posts

Back
Top