Hot Wash Cold Rinse Cycle?

[Chetlaham]

no when using the max fill on main wash when it drain the wash water pump start then stop for a sec and start again and drain like suppose to @Chetlaham

Cycling of the pump at the start of drain is normal, it may also stop for a minute or two during or at the end of the spin cycle.

 

[pierreandreply4]

Cycling of the pump at the start of drain is normal, it may also stop for a minute or two during or at the end of the spin cycle.

thank you i am no tech so for me its not easy to determine what the problem is when it comes to error code but if manage to convince my mom that we should go on the vintage i would go for a whirlpool direct drive machine like this or a ge filter flo like this eaton viking made by ge

 

[Chetlaham]

Go with a featured direct drive, they are the best. The 3 speed version will have you being grateful every load.

 

[agiflow]

If you could find a KitchenAid washer with a 3 speed motor and the bigger base agitator I would say go for it. You get a gentler agitation on the slower speed but at the same time lose none of the effectual turnover and cleaning power.

 

[DADoES]

Most well water comes out of the ground at around 50° ...

I checked the cold flow (during rinse fill) at the fill flume on a load an hour ago. 83°F. Well water, the pressure tank is in my garage a long distance from the well/pump location.