Kenmore belt drive clunking/banging and not spinning/draining properly?

[dustin92]

update!

We have success! It's working properly and NOT leaking! Found out the drain hose was loose and causing the water to leak inside the cabinet, running across and under to the front right side. Ran a load and all seems fine, no more clunking and banging, washing, draining and spinning. I'm going to go over probably tomorrow and put a larger diameter drain hose on to help it drain a little better.

 

[kenmoreman]

I knew it had to be simple. If you go with the full size hose make sure the sink can keep up with the water flow. Sometimes we can beat a problem to death! It was the cam bar spring. God bless us all!

 

[dustin92]

Thanks to alL who helped, it is GREATLY appreciated!