New owner of a 2015 Speed Queen TL washer!

[bobcurley]

gusherb said: "I'm curious if having some knocking sounds during spin is anything to worry about. My machine has been developing some noises like that lately."

The last 50 seconds of my video #2 has a chugging sound about once per second. Is that what you hear? I can't imagine what it is. In my case the chugging is not caused by unbalanced clothes because the tub only had water to begin with! The tub is 99% empty by that point in the video.

 

[mrb627]

Heavy Duty Pump?

Please post your thoughts and perhaps pix of the two different pumps when your HDP arrives. I am interested in the differences between the two...

Malcolm

 

[mr_b]

Go to a Landromat and See

bobcurley = As a suggestion, find a Laundromat that has your style TL Speed Queen and listen to it. This may answer you question about what constitutes normal. If you live in the San Diego area there is an excellent fairly new all Speed Queen Laundromat is Serra Mesa.

 

[mrb627]

Pump-Less

You could always disconnect the pump from the motor then run a spin and see if the noise is gone.

Malcolm

 

[bobcurley]

Can the pump be removed without removing the motor by simply removing the three mounting clips? I doubt it; there is not much clearance between the pump and the bottom panel, so I probably cannot drop the pump far enough to disengage it from the motor shaft.

 

[combo52]

SQ TL Washer Pumps

The water pump can be removed and replaced with the motor in place [ we do several times every week ]. It is not all that easy to reinstall the clips however with the motor in place. By far the worst thing about the current SQ TL washers is the lack of a neutral drain and a separate electric drain pump. The current design is a waste of electricity, hell on belt life and the spin drain leaves much more lint and grit in the clean laundry and causes about 1/2 all the service calls we are running on these washers. SQ could save a lot of money on warranty calls if they would spend another $5 on an electric pump.

 

[ We are now carrying transmission drive pulleys in our trucks because they melt when something gets caught in these washers because it gets thrown over the wash basket during the stupid SPIN DRAIN, of course this also destroys the belt and drain pump every time it happens as well]

 

I don't think that changing the water pump to the SO CALLED heavy duty one will make any difference in the sound level, the pump makes very little noise.

 

[launderess]

Was reading an older issue of CR

They really didn't like SQ top loaders, any particular reason why?

 

[alr2903]

Years ago we had a Raytheon Amana. It had a strange vibration on low speed spin that came from the drain hose.  There was a section of plastic hose after the pump to the drain hose that was secured to the floor of the machine.  The vibration I heard was solved by wedging a tiny piece of foam weather strip between the plastic tab on the hose that held it to the metal floor plate. I wonder if the drain hose is still secured to the baseplate with the plastic tab on the new SQ's?

 

[bobcurley]

Repair Videos, Diagrams & Parts

LWNE52SP is the commercial equivalent of the AWNE82SP.

To get the Parts Manual, which has exploded views of each subassembly and part numbers, enter LWNE52SP in the search field here:
http://www.speedqueencommercial.com/opl/en-us/support/product-manuals.aspx

Repair videos:
http://www.pwslaundry.com/pt-3270-how-to-videos.html

 

[combo52]

CRs Didn't Really Like SQ TL Washers

What is the age of the issue you were reading ?

 

[launderess]

2013

Low scoring top-loaders:
Speed Queen AWN542, $800
Maytag Centennial MVWC300V, $430
Kenmore 2125, $520
Whirlpool WTW4950, $600

"...these washers either didn't clean well, were inefficient, or both".
"... all these models had overall scores of 40 or lower....[this post was last edited: 7/3/2015-18:54]

 

[gusherb]

Bob

That chugging is the sound of the pump cavitating. That's actually one of the sounds I love about my SQ (though it doesn't do it once per second, probably cuz yours was empty). Mines more of a rattle or knock, started doing it in low speed spin at first and now it does it throughout high speed spin too.

 

[cuffs054]

So, a low score is good right? Just like golf...

 

[washman]

Wonder what kind of H2Oh! Cr uses

My SQ cleans just fine thank you.

And it does not take half a day to do it.

Nor has it ever needed "cleaned" with extra cost "cleaners".

Long live the SQ!

 

[rapunzel]

"My SQ cleans just fine thank you.

And it does not take half a day to do it.

Nor has it ever needed "cleaned" with extra cost "cleaners".

Long live the SQ!"

Ditto!

 

[mrsalvo]

"My SQ cleans just fine thank you.

And it does not take half a day to do it.

Nor has it ever needed "cleaned" with extra cost "cleaners".

Long live the SQ!"

Ditto also.

 

[combo52]

CRs Cleaning Tests

CRs has fairly soft water in their area, they generally use the warm setting which is pretty cool in SQ TL washers, I also believe they don't adjust the amount of detergent up for high water use machines, so a SQ or other water hog machines will not do well compared to HE machines when it comes to removing tough stains and other dirt.

 

I have long said that the ONLY way I will use a conventional TL washer is if I can reuse the wash water because they need a very large amount of hot water and detergent bleach etc to do a decent job and they are just too expensive to use if you do not reuse the wash water.

 

[frigilux]

Hear, hear! The reason for Speed Queen's low ranking by CR isn't because it's a poorly-made machine. It's because there's little chance a traditional top-loader will perform as well as an HE front-loader (or top-loader) given the parameters of their test in 75 degree water. An HE's detergent solution is 5-6 times more concentrated; the wash time is 2-4 times longer. All the water in the world isn't going to make up for the advantages an HE machine (especially a front-loader) has under those conditions.

CR also scores on water/energy efficiency and how much water is removed in the final spin (saving time/energy in the dryer). Those parameters make it difficult for the SQ top-loader to score well in their tests.

 

[washman]

He's gone folks

 

[rapunzel]

You are missing the point. People, like myself, who buy these washers, don't care about CR reviews. I know exactly what I have got. I've had it for almost 30 years now and am getting exactly what I want in a washing machine.

BTW, I have recently purchased Dynamo and Ajax HE liquid detergent and they seem to work pretty good so far. My washer is used in a real home setting to wash real clothes for real people - it just doesn't get any more real than that. I know, it's totally unreal.