hmmm I should check mine and see if they did that to me too.
Speed Queen washers and dryers for sale
- Thread starter yogitunes
- Start date
Help Support :
mrb627
Well-known member
Notification
I got an email that my cap had shipped, but no word on the agitator. I'll update when it arrives.
Malcolm
I got an email that my cap had shipped, but no word on the agitator. I'll update when it arrives.
Malcolm
Now this is interesting...I checked Sears link for the agitator and I checked UPS tracking...it shipped and I will be getting it tomorrow and the cap as well. I saw the tracking for both...so that to me is telling if they send out an email saying that its backordered yet it shipped...I dunno...
mrb627
Well-known member
LOL
Typical Sears....
Malcolm
Typical Sears....
Malcolm
I was thinking the same thing...typical Sears.....
the Hot water valve doesn't know what the Cold water valve is doing!
the Hot water valve doesn't know what the Cold water valve is doing!
NOW HEAR THIS...............yesterdays email said 7 day delay....
UPS just droped off my order 5 minutes ago with everything in the box.....
how do these guys always know when I'm in the shower, no matter what time I select, had to answer the door in a towel, dripping wet, good thing I didn't have to sign for it....lol
UPS just droped off my order 5 minutes ago with everything in the box.....
how do these guys always know when I'm in the shower, no matter what time I select, had to answer the door in a towel, dripping wet, good thing I didn't have to sign for it....lol
I just got my agitator today. It's the small one - solid vane...small enough to be a wringer washer agitator! Don't see this one going into my AWN542, but nice to have for the collection.
[this post was last edited: 10/12/2010-13:32]
[this post was last edited: 10/12/2010-13:32]
Dan
can you do a pic side by side......it only seems to be a 1/2 inch difference......
but just the same these agitators could have been a little taller and bigger in the vanes
can you do a pic side by side......it only seems to be a 1/2 inch difference......
but just the same these agitators could have been a little taller and bigger in the vanes
Thanks a million.............sounds like you have a tight one there.....try the hot water and rocking motion as you pull up, those "fingers" really hold tight once in place
mrb627
Well-known member
A Follow Up
Just got a follow up email from Sears.
Dear Malcolm,
We are sorry to inform you that the item(s) ordered on 10/06/2010 for order #W6##### is(are) temporarily out of stock. We have placed a backorder for you. We apologize for the inconvenience.
The estimated ship date is available per item. Please review the status of each line item.
If the estimated ship date is not known, the supplier will provide an estimated ship date as soon as it is known. If you have not received your item(s) within ten business days, please Contact Us and we will verify the status of the order.
If you prefer, we will issue credit for the backordered item(s) and bill your account upon shipment of the item(s). Contact Us if you would like to receive credit for the backordered item(s).
33174
AGITATOR
The Estimated Ship date for this item is 10/12/2010.
Ummm. Isn't today the 12th?
Malcolm
Just got a follow up email from Sears.
Dear Malcolm,
We are sorry to inform you that the item(s) ordered on 10/06/2010 for order #W6##### is(are) temporarily out of stock. We have placed a backorder for you. We apologize for the inconvenience.
The estimated ship date is available per item. Please review the status of each line item.
If the estimated ship date is not known, the supplier will provide an estimated ship date as soon as it is known. If you have not received your item(s) within ten business days, please Contact Us and we will verify the status of the order.
If you prefer, we will issue credit for the backordered item(s) and bill your account upon shipment of the item(s). Contact Us if you would like to receive credit for the backordered item(s).
33174
AGITATOR
The Estimated Ship date for this item is 10/12/2010.
Ummm. Isn't today the 12th?
Malcolm
let the hot water come half way up the agitator and pull the agitator to the front to get the air bubble out. That way the hot water gets into the fingers...wait 10 mins and then grab the agitator at the base and move your fingers under the base...it should pop up. Mine was tight until I did that and it came right off. I should be getting mine today as well...
And the video...
I've done a few loads now (towels washing as we speak). It's amazing how fast one can throw a load of laundy together during play time.
Anyway, this is the little agitator that could. It has a tremendous amount of "undertoe", and keeps the clothes down and low near the fins. Very nice turnover on these towels at the moment.
Would make the perfect agitator for really grimy clothes. I think it's a bit too aggressive for my needs. It "rocks" the water back and forth--even with clothes. Something the flex vane only does when the load is empty.
On XL setting, the water comes to the edge of the bottom of the fabric softener dispenser. I have my water level set 1/2 way between the top of the straight holes and the staggered holes in the basket.
<object width="640" height="385"><param name="movie" value=""></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
I've done a few loads now (towels washing as we speak). It's amazing how fast one can throw a load of laundy together during play time.
Anyway, this is the little agitator that could. It has a tremendous amount of "undertoe", and keeps the clothes down and low near the fins. Very nice turnover on these towels at the moment.
Would make the perfect agitator for really grimy clothes. I think it's a bit too aggressive for my needs. It "rocks" the water back and forth--even with clothes. Something the flex vane only does when the load is empty.
On XL setting, the water comes to the edge of the bottom of the fabric softener dispenser. I have my water level set 1/2 way between the top of the straight holes and the staggered holes in the basket.
<object width="640" height="385"><param name="movie" value=""></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
Wow....there is a difference in size...as if SIZE MATTERS...lol...
which do you guys prefer......I'm thinking of a flex-fin for mine, because of the height....
which do you guys prefer......I'm thinking of a flex-fin for mine, because of the height....
mrb627
Well-known member
Special Not-So Delivery
I got home from work and there was a box on the front porch. I opened it up and to my surprise there is what appears to be parts of a pressure washer in a bag marked agitator cap on it.
WTF is going on at Sears that a handle from a alleged pressure washer can be shipped as an agitator cap. I guess I'll be taking this to a Sears store nearby and fighting to get my money back.
Ask me why I'll never shop at Sears again?
Malcolm
I got home from work and there was a box on the front porch. I opened it up and to my surprise there is what appears to be parts of a pressure washer in a bag marked agitator cap on it.
WTF is going on at Sears that a handle from a alleged pressure washer can be shipped as an agitator cap. I guess I'll be taking this to a Sears store nearby and fighting to get my money back.
Ask me why I'll never shop at Sears again?
Malcolm
