You wash, you dry, So do you iron?

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

OCD

New Yawk-ese...

Right out of the DSM-IV (Diagnostic and Statistical Manual #4)... a reference book for psychologists/psychiatrist "A Shrinks Bible"

Obsessive
Compulsive
Disorder.

"I just couln't help myself."

a neat little euphimism for anyone who overdoes anything. (applies to nymphomaiacs, even!)
 
I have been watching this thread for awhile. Yes my wife irons here. We both work full itme so Saturday is wash day. either we throw them in the dryer or when nice hang outside to dry. When dry, shirts, pants get hung on hangers and then Sunday morning my wife irons shirts, pants, t-shirts, dress clothes, we wash windows a few times a year and we wash and iron the curtains, drapes if needed. I even powerwash the outide of my house twice a year and polish my hardwood floors once a year.

Those of you who work, word of warning people at work talk, both men and womaen. I have over heard many say "he/she looks like an un-made bed" what does his/her significant other think. I have seen many dryer sheets lying in the aisles walking to other offices or cafeteria. My wife saw one coworker and said to her what's hanging out of your pants leg, here it was a pair of panyhose, she said it looked like a magician trick as she pulled them out,
 
Good Mike-I think everyone should try to be neat. Shined shoes, haircuts, pressed clothes. People do talk, your right. BTW- I'll volunteer to give free ironing lessons this summer at convention. No, I never did a mangle, but the rest is easy. I see the iron about once a week or so, so I'm not obsessive-compulsive about it. Now I have a friend, my wife's church friend who irons everything, including towels(?). Uses towels only once, for 2 people she has a heap of laundry. And yet she catches the first bug of the season and every bug thereafter. I wish she'd slow down a little. Doesn't smoke, drink, drug, even doesn't drink caffeine beverages. How pure can one get?
 
I have a great '60s GE steam iron, but I never have time to use it. Fortunately I wear a lot of synthetics, so I can just pull 'em out of the dryer and onto me.
 
Wacky mother-in-law ( in novel format)

Hey Jon speaking of getting creases while wearing..

My ex-mother-in-law (nicknamed "Mother Misery" by her own kid)

1) Would hang her DIRTY laundry on hangers (rather than use a hamper)so that it would not crease.

2) Would safety-pin the socks together BEFORE throwing them in the washer.

3) Learned how to use an automatic washer from her husband who literally had a third-grade education. To wit:

4)They would fill up the (T/L) machine with water, THEN add the clothes. ("Gee why is it overflowing?")

Emily, darling, what does the lid say? (it was a Sears with full instructons on the lid.. golden gobbler actually...)

Line #1 "Load clothes loosely in washer....

5) The machine was on a dolly (to get it to the sink) and would fly across the room upon spin portion of the cycle [They owned their own home by that time.] Changed two of four wheels to include a lock/brake.

6) When they lived in an apartment, renters were dissuaded from having a washer because neighbors "would get suds in their sinks" Solution? Use a tiny amiount that can not hold soil in suspension. In a nutshell, dirt form armpits and inseam areas was re-distributed to the rest of the load. The loads were grey and yellow and nasty! Didn't smell too good either.

Well she went out of town for a week:

1) I painted every room in the house to a color scheme I belied to be to her taste. (Had not been done in 12 years. When you cook with gas that is REAL nasty.) I got the colors right she finally said. (Didn't really G.A.S.)

2) Had a hole chopped in the wall to install a multi-room A/C.

3) De-cluttered all manner of junk hiding behind full-length curtains mounted three feet (a meter) from the wall. Also removed curtain rod to get rid of a S#$% hiding-place.

4) Got rid of 32 leaf & lawn bags of worthless papers hidden in single-car garage.

5) Put a goose-neck metal end over the drain hose of the washer to weigh-it down when it sat in the sink.

6) Washed everything with a pre-wash, main wash, and two rinses, and brought it all to the laundromat down the street to dry.

7) Threw out everything that was torn, rags, stained or age-inappropraite (e.g. tube-top on a 60+ y.o. woman who weighs as much as an 18-wheeler.) NO, SORRY GOTTA GO!

8) Bought two mirrored wardrobe closets and re-distributed the pack-rat's stuff.

..and after she cried, majorly, she got on her knees literally and thanked me.

BUT THE BEST IS "How did you get my clothes so clean and smelling so good (Taurus woman.. scent is everything) my response simply.... I USED SOAP!!!

She really did not believe me. So I said simply..they went to school for years to get the credentials to be able to create and manufacture a detergent and they say 1 cup (of powder) i sthe amoutn to use.. how did you decide 1/10th of a cup suffices? She laughed and got the point.

Craziness, grandma used to say, does not go to the mountains it goes to people.
 
OCD- Compulsive hoarding

HA! My ex-mother-in-law has a (defined) syndrome!

A quote from the link:

"Collier Brothers Syndrome is a beautiful but tragic story of brotherhood. Langley and Lusk Collier suffer from Obsessive Compulsive Hoarding and live a reclusive life away from the prying eyes of a judgmental world. The film paints an intimate portrait of their lives and the destiny that bestows them."

Now why can't I find this manifestation of OCD defined on the web rather than getting a description of a movie?

 
OK, Jon...now the reason that I like to iron (other than I find it to be theraputic, crazy I know) is that the fibers on the garment or linen are changed and much smoother to the touch. Hence the reason that better hotel linens feel so nice to sleep on, they have been ironed. When people say that their grandmother ironed everything, they usually had a mangle or a maid. I still use my grandmother's mangle, old Ironrite..it is really a great invention. I have learned that Mele, went and saw it. My old Ironrite is really superior in design and function. Town & Country magazine says now that the trend for home design is not only a "whomped out" kitchen, but a super duper laundry room, guess we can all hold our heads high..ha.
 
Have a Pfaff ironer, which is like the Ironrite, but on steriods. In other words it has the large roller of a Miele ironer, but but like an Ironrite in that the heating plate is on the bottom so heat travels up.

Neither the Miele or Pfaff have the infinite adjustable heat controls that many vintage ironers have. My vintage Thor GladIron goes from a low (rayons and silks) to a super hot high for linens. Guess much like modern clothes irons, ironers have been dumbed down to help prevent burns.

Launderess

 
I Iron but...

sometimes it can be a pain. When I iron a shirt for work, I usually iron both sides of the front of the shirt as it seems to make the press last a bit longer (tho' no starch on the inside). Used to own a Rowenta (forget what model) but after only 2 years of light use the auto-off switch died. Dumped it and went with a B&D cheapie from Wally World. Think we paid around $14 for it. Has been going strong 4 years. No it doesn't have the steam like the Rowenta but I don't seem to miss it, use a dollar store spray bottle for misting fabrics with water. Must be doing something right, now wifey doesn't do as much of the ironing and will let me iron her stuff! I also try to place a washcloth under the seatbelt so that the shirt won't crease as I drive. That may be a little OCD but it seems to help!
 
Hey Laundress..you have educated me...I never knew that Pfaff produces a rotary ironer....this looks too cool. I had always wondered why there had never been a domestic unit created with steam...now I know there is one. Is this as great as it sounds?
 
Pfaff ironers are designed to mimic commercial ironers, hence the steam boiler feature. Am here to tell you the word "boiler" is apt as the unit produces healthy and strong steam. Down side is with both steam and thermostat set to "high" this baby pulls over 3,000 watts of power. Even on 220/240 power this is quite a bit of juice.

Only problem I have with the design is it is hard to do really wide/long items as the roller supports get in the way after too much material gathers in back. Sometimes I just put a clean bed sheet on the floor around the ironer and allow the material to fall to the floor in gathers.

We nabbed this ironer from FleaBay. Apparently a family had brought it over from across the pond but it was now surplus to requirements.

Launderess
 
Laundress

Laundress....man I was all excited about that Pfaff unit...but 3000 watts!..oy!...I of course immed went to Google and then contacted the local dealer here in Atlanta. He was familiar with the unit and basically tried to sell me on the Mele rotary iron advising that the Pfaff presently did not (as you advised me) come in a 110.I guess I will be happy with my Ironrites and just continue to dampen as usual. You know its funny how so many people have never even used a hand iron. I can remember my mom had a housekeeper that used to tell me "before you leave this house you are going to know how to fry chicken, make green beans and iron a shirt!"..I can do all three..ha. Hey, I am getting together with Cheri from Ironrite .com and trying to start a small club...let me know if you may want more info....best, M
 
Pfaff Ironer

Here are the specs for the model I have:

Heating power - 2.05kW
Steam Boiler Power - 1.0kW
Water Pump - 120v
Boiling Capacity - 1.3 Litres
Steaming Time - 60 mins
Motor Input - 90W
Line Voltage - 240V, 50 Cycles
Power Input - 3.15kW
Maximum Input Current - 14.3A

Below is a snap of a model similar to mine. When I finally get a dig-cam, will make sure to put up snaps of mine.

Spoke with Pfaff customer serivce here in the States, and was told Pfaff never sold their ironers on this side of the pond. Sewing and some other irons/pressing equipment yes, but not the ironer. The young lad was nice enough in contacting Germany for me and said it may be possible to order parts from them, but should I need service I may be on my own.

Maybe 3000w sticks in my mind because that is the size of the step up transformer I use to run the ironer. Yes, I know it needs to be on a dedicated 220/240 outlet, but as we only have the one and the washer/dryer takes that. Besides it has that funky Miele outlet, and would at the least require another visit from Mr. Electrican to install another type of outlet/another 220 panel on the breaker box, both of which the CFO have ruled out at the moment. I could push things, but word is Miele is coming out with a larger washer soon, so may need all the funds I can get!

You and Cheri forming an ironer club? Theres a thing! What happened to the Ironrite site? I'd love to hear more!

Launderess
 
Hey Laundress,,,Always nice to read your posts....Yes you basically heard exactly what I did from Pfaff. The guy here in Atl did advise that he had "just rec'd a brochure" on the mangle and he could not remember the particulars but thinks that they may be planning on introducing it here. I can remember when you could not give away a mangle...now they are hot(pardon the pun)....Cheri had taken a break from hosting the site and has recently re-posted the site. She is still at Ironrite.com. The site as she states in it is a "labor of love" and she is a busy girl so I told her I would help in any way that I could. I just got through converting an extra bedroom into a laundry room so now I have even more space for gadgets. People still scratch their heads when they see the Ironrite...the really scratch their heads when I crank out dress shirts. To think I used to do that by hand or get lazy and send them out...oy....
 
Love vintage ironers as I do, wanted a longer roller so wouldn't have to fold large items into so many folds. Also adding to the mix was the fact my Thor GladIron has only one open end, so ironing large items was even more difficult.

Space wise , just didn't have the room for an IronRite, and when I saw the Pfaff, just decided to go for it. If it ever goes, probably will spring for the Miele.

The great thing about the Pfaff, is like the Ironrite it is open on both ends, which makes ironing large items a snap. One simply passes the middle though first, allowing the ends to hang over, then do the edges on both sides. Easy as pie!
 
There was...

...a link, Pete, on a different thread to an Ironrite video that showed how to do it. If I find it, I'll point you to it, unless someone else knows it.

I must admit a fascination with ironers like this...

John
 

Latest posts

Back
Top