Zanussi ZWF16581W

[ozzie908]

My Mum has a XC Zanny

I have read with interest this thread on Zanussi machines I personally cannot fault them Mums on her 3rd in 24 years and the last one before the current was only replaced because its bearing among other things were going. Now I don't know if any of you have a appliance shop nearby called The Washhouse? Thats where I bought the XC 1400 spin from in 2001 and they gave a lifetime warranty for labour so the 2 occasions we have called them out it only cost £12 for a new cable inside that cracked causing the machine to go on and off the other time it leaked and needed tightening all this done for free so how can I complain its used most days we got the dryer to go with it and thats done well too On the strength of our washer doing so well we replaced the gas oven with a Zanussi fan one and thats brilliant too.
Just my take on Zanussi my appliance of science.lol

Austin

 

[ronhic]

Folks...

I threw BEKO into the mix, because my mother replaced a 21yr old ASEA with one.....rebadged as Fisher and Paykel here. Fisher and Paykel do charge rather a lot of money for a machine that in the UK sells for about GBP300 (or less)...here they are well over GBP500 at recommended retail....but then a basic Miele works out at GBP1100.....

 

...and that's with a STRONG Aussie dollar.

 

These are not considered 'cheap' or 'budget' machines in our market.

 

Anyway, mum loves it. Our programming may be slightly different to the UKs, but the 'daily wash' is 60 minutes, 40c with a good water level for a modern machine and 3 reasonable rinses. Engage 'quick' and you get a 46 minute, 40c cycle with 2 rinses with water 2/53 or more up the door....perfect!

Loading…

www.fisherpaykel.com.au

 

[aeg03]

Aquarius

I am more than happy with my Dyson and have been with AEG. I think it is good to let others know of any problems that might arise with any product and no I don't see a pattern here as I have never really complained as such about my Dyson, I wanted to advise on a few issues it has. Again this is the washer forum not vacuum one so this doesn't need to be mentioned here!

FL1012 & Ultimafan,

Many thanks guys. It looks like it will be the Zanussi machine that I'll be getting. I will let U guys know how I get on when I get it