Hoover A3110 Washing Machine Restoration Part 2
In place on the tub mount, now for the nylon shroud
In place on the tub mount, now for the nylon shroud
Hoover A3110 Washing Machine Restoration 1980 Model...Part 2
- Thread starter chestermikeuk
- Start date
Help Support :
Hoover A3110 Washing Machine Restoration Part 2
Hoover A3110 Washing Machine Restoration Part 2
Spring placed back over suspension arm
Spring placed back over suspension arm
Hoover A3110 Washing Machine Restoration Part 2
Only the best will do!!!
Only the best will do!!!
Hoover A3110 Washing Machine Restoration Part 2
Nylon shroud ready for final fitting.
Nylon shroud ready for final fitting.
Hoover A3110 Washing Machine Restoration Part 2
New anti-twist suspension kit now in place - one down one to go!!
New anti-twist suspension kit now in place - one down one to go!!
Hoover A3110 Washing Machine Restoration Part 2
2nd Old one removed ready for repeat performance!!
2nd Old one removed ready for repeat performance!!
Hoover A3110 Washing Machine Restoration Part 2
2nd arm done and nearly in..
2nd arm done and nearly in..
Hoover A3110 Washing Machine Restoration Part 2
Both arms complete and the chasis given a coat of rustoleum..
Both arms complete and the chasis given a coat of rustoleum..
Hoover A3110 Washing Machine Restoration Part 2
Pump ready to be fitted back onto bracket with two new screws & nuts
Pump ready to be fitted back onto bracket with two new screws & nuts
Hoover A3110 Washing Machine Restoration Part 2
Suspension Arms - check, Sump Hose - check, Pump -check,
The terminal block you can see with white connector is for the motor..
Suspension Arms - check, Sump Hose - check, Pump -check,
The terminal block you can see with white connector is for the motor..
Hoover A3110 Washing Machine Restoration Part 2
Right way up and now ready for tub inserted, rubber boot and door to be attached!!
Right way up and now ready for tub inserted, rubber boot and door to be attached!!
Hoover A3110 Washing Machine Restoration Part 2
Attaching top tub springs and a few more wires...
Attaching top tub springs and a few more wires...
Hoover A3110 Washing Machine Restoration Part 2
Springs attached...and placed onto her front for inner tub insertion..
Springs attached...and placed onto her front for inner tub insertion..
Hoover A3110 Washing Machine Restoration Part 2
A smear of adhesive for the tub seal..
A smear of adhesive for the tub seal..
Hoover A3110 Washing Machine Restoration Part 2
Inner tub being placed back into the outer tub - just noticed the Welsh Dragon giving its approval -
this renovation is taking place only 25 miles away from wenst it was made in the Hoover factory in Merthyr Tydfil, South Wales...
Inner tub being placed back into the outer tub - just noticed the Welsh Dragon giving its approval -
this renovation is taking place only 25 miles away from wenst it was made in the Hoover factory in Merthyr Tydfil, South Wales...
Hoover A3110 Washing Machine Restoration Part 2
Having made sure the heater is placed over the freshly painted bracket we can now commence the bolting down
Having made sure the heater is placed over the freshly painted bracket we can now commence the bolting down
Hoover A3110 Washing Machine Restoration Part 2
many hands make lite work
many hands make lite work
Hoover A3110 Washing Machine Restoration Part 2
And round again to tighten, clamping the rubber seal firmly for a water tight seal..
And round again to tighten, clamping the rubber seal firmly for a water tight seal..
Hoover A3110 Washing Machine Restoration Part 2
Attaching brace bracket and heater / thermostat wiring loom
Attaching brace bracket and heater / thermostat wiring loom
Similar threads
