It gets better... the heating element for the Maytag MAH7500 washer is not longer available.
:-(
:-(
New Front Loader Quest
- Thread starter bajaespuma
- Start date
Help Support :
527 and 627, door
Well, on the Electrolux web site for USA, there's no mention of being able to reverse the door, or change how it swings. Last time I looked at Elux washers (must have been at Lowe's), I didn't see how the door could be reversed...
Also, to get the "steam" function, one needs to spend about $200 more, and there's not indication that it heats the water. Although I'm guessing that if it produces steam some of the water must be getting heated to boiling. Not sure how that works.
Update: I see that the TOL 627 has a Sanitize function, so it must be getting the water pretty hot (I'm guessing 150F, maybe higher). It also has a "whitest whites" function which may also heat the water above 120F.
Maybe I'll just move one of the Miele machines out of the workshop and put that in the laundry closet. I could move the 7500 to the workshop for when I have large loads that require its increased capacity over the Miele. I have two 1025's and one 1918. I know the 1918 works. Not sure about the 1025's. And I have an old Frigidaire front loader. No heater, of course.
Well, on the Electrolux web site for USA, there's no mention of being able to reverse the door, or change how it swings. Last time I looked at Elux washers (must have been at Lowe's), I didn't see how the door could be reversed...
Also, to get the "steam" function, one needs to spend about $200 more, and there's not indication that it heats the water. Although I'm guessing that if it produces steam some of the water must be getting heated to boiling. Not sure how that works.
Update: I see that the TOL 627 has a Sanitize function, so it must be getting the water pretty hot (I'm guessing 150F, maybe higher). It also has a "whitest whites" function which may also heat the water above 120F.
Maybe I'll just move one of the Miele machines out of the workshop and put that in the laundry closet. I could move the 7500 to the workshop for when I have large loads that require its increased capacity over the Miele. I have two 1025's and one 1918. I know the 1918 works. Not sure about the 1025's. And I have an old Frigidaire front loader. No heater, of course.
It does say that
I just checked. Download the instalation manual for the 627.
Or under specifications, exterior specifications (third column top header) and 4th bullet point.
I just checked. Download the instalation manual for the 627.
Or under specifications, exterior specifications (third column top header) and 4th bullet point.
Nonheating Maytag Neptune front load washer
Hi Rich if you smelled something burning it’s not likely the heating element it’s more likely a wiring connection or maybe the main board I would check into it a little bit the heating elements almost never fail.
John L
Hi Rich if you smelled something burning it’s not likely the heating element it’s more likely a wiring connection or maybe the main board I would check into it a little bit the heating elements almost never fail.
John L
Dunno if anyone cares about that info
But this system has once more been something ELux first launched over here.
This is how it works basicly:
ELux verry quickly realized that the key to efficent and thourough washing in short time with verry little fabric damage was to quickly saturate a load with water that has already been mixed with detergent.
So they - from what I can tell - pioneered the 3-pump design.
I think this design is only implemented on the TOL 627, dunno if the 527 has the 3 pumps or just drain and recirc.
The machines starts by filling with some water to fill sump and pump.
Depending on cycle the machine might first saturate the load fully or partially with plain water.
For that it uses the recirculation pump.
Then it dispenses detergent/softner into the sump.
That is mixed with the water in the sump, tub and pump via a second recirculation pump that does not spray directly into the load but instead just flows back into the tub.
This mixes water and detergent verry well before creating much interaction with the load.
Once detergent is sufficently dissolved it sprays the highly concentrated dertgent solution onto the load.
Now the difference in concentration kicks in and pulls the detergent laden water way faster and way deeper into the fibres of the laundry.
Exchanging the water in the fibres through this mechanism (I forgot the name of it - dont think it's osmosis, the same mechanism that works on your saline household in your body) while tumbling plus recirculation results in verry good and verry quick soil removal.
Same mechanism is used for rinsing and softening, thus the somewhat less obvious spin behaviours during the rinsing stage.
Detergent never sits unused, there are no chemical or thermal hotsports throughout the load, rinsing is verry efficent yet decent and cycles aren't horribly long.
If I were ELux I would push for using DC pumps verry quickly.
The more pumps you have running the more annoying the noises can get and the bigger the marketing effect can be made while being really just future proofing and without a huge expense.
But this system has once more been something ELux first launched over here.
This is how it works basicly:
ELux verry quickly realized that the key to efficent and thourough washing in short time with verry little fabric damage was to quickly saturate a load with water that has already been mixed with detergent.
So they - from what I can tell - pioneered the 3-pump design.
I think this design is only implemented on the TOL 627, dunno if the 527 has the 3 pumps or just drain and recirc.
The machines starts by filling with some water to fill sump and pump.
Depending on cycle the machine might first saturate the load fully or partially with plain water.
For that it uses the recirculation pump.
Then it dispenses detergent/softner into the sump.
That is mixed with the water in the sump, tub and pump via a second recirculation pump that does not spray directly into the load but instead just flows back into the tub.
This mixes water and detergent verry well before creating much interaction with the load.
Once detergent is sufficently dissolved it sprays the highly concentrated dertgent solution onto the load.
Now the difference in concentration kicks in and pulls the detergent laden water way faster and way deeper into the fibres of the laundry.
Exchanging the water in the fibres through this mechanism (I forgot the name of it - dont think it's osmosis, the same mechanism that works on your saline household in your body) while tumbling plus recirculation results in verry good and verry quick soil removal.
Same mechanism is used for rinsing and softening, thus the somewhat less obvious spin behaviours during the rinsing stage.
Detergent never sits unused, there are no chemical or thermal hotsports throughout the load, rinsing is verry efficent yet decent and cycles aren't horribly long.
If I were ELux I would push for using DC pumps verry quickly.
The more pumps you have running the more annoying the noises can get and the bigger the marketing effect can be made while being really just future proofing and without a huge expense.
Actually no clue tbh.
I think it's all down to what your laundry habits are like, what your laundry setup would be like etc.
For example, while the LGs score not that much worse in terms of wash results vs ELux to the point that I don't think that I personally would know the difference in day to day washing, I do believe that some people would love to have a decent number of loads to be done about 10-15min quicker in the washer.
So if you focus on speed, the LG will be the winner.
If you don't mind the slightly longer cycles, the ELux will clean the crap out of the LG probably in those situations where you really need it.
No pretreatment, nothing.
If you buy a matched set, the ELux dryers consistently score better than the LGs.
Better drying performance, lower temperatures, better sensing system.
I personally find my 45dB DW to not be really that quiet.
For me the DC pumps are a really nice thing.
Would my washer be sitting in the basement or a laundry closet away from most living areas, the occasional more pronounced hum wouldn't be a matter.
Cycles wise the ELux is more compact and therefore allows more option flexibility.
For example Sanitize is available on a couple more cycles.
The Solid soil option could make sense if you live in an rural muddy area and are more outdoorsy.
The LG has more cycles, but less customizability there.
On the dryer side the LG has more preset sensor cycles, but if I'm not mistaken you can't alter the drying temperature on most of them.
The ELux has less cycles, but you can change temperature on them more widely.
And then there is price.
For me, a 3900 would have all the features I would want in an LG except maybe for TrueSteam (though not sure if any current LG still offers that).
For an ELux I would have to go TOL.
If I can get both for the same price as matched set that would make it hard.
If either is significantly cheaper, that would swing me that way.
I think it's all down to what your laundry habits are like, what your laundry setup would be like etc.
For example, while the LGs score not that much worse in terms of wash results vs ELux to the point that I don't think that I personally would know the difference in day to day washing, I do believe that some people would love to have a decent number of loads to be done about 10-15min quicker in the washer.
So if you focus on speed, the LG will be the winner.
If you don't mind the slightly longer cycles, the ELux will clean the crap out of the LG probably in those situations where you really need it.
No pretreatment, nothing.
If you buy a matched set, the ELux dryers consistently score better than the LGs.
Better drying performance, lower temperatures, better sensing system.
I personally find my 45dB DW to not be really that quiet.
For me the DC pumps are a really nice thing.
Would my washer be sitting in the basement or a laundry closet away from most living areas, the occasional more pronounced hum wouldn't be a matter.
Cycles wise the ELux is more compact and therefore allows more option flexibility.
For example Sanitize is available on a couple more cycles.
The Solid soil option could make sense if you live in an rural muddy area and are more outdoorsy.
The LG has more cycles, but less customizability there.
On the dryer side the LG has more preset sensor cycles, but if I'm not mistaken you can't alter the drying temperature on most of them.
The ELux has less cycles, but you can change temperature on them more widely.
And then there is price.
For me, a 3900 would have all the features I would want in an LG except maybe for TrueSteam (though not sure if any current LG still offers that).
For an ELux I would have to go TOL.
If I can get both for the same price as matched set that would make it hard.
If either is significantly cheaper, that would swing me that way.
mark_wpduet
Well-known member
Keep in mind
The Elux's don't have coin traps but the LG's do. Not a huge deal IF you check pockets religiously before loading. I'm the only one that does laundry and over the years the ONLY things I can think of that I missed are maybe a couple of dimes and a small screwdriver (all which stayed in the drum) The few times I've checked my coin trap over the years, there's never anything in it but a few little pieces of harmless lint.
If you have multiple people doing laundry and something gets into the pump, I think the entire machine has to be taken apart to get to it. This is the only thing that annoys me about the Elux's. If LG can put a coin trap door right upfront, why don't they?
On the new Duets, I believe they now have a coin trap.....but the Maytags don't. Not sure what's up with that weirdness.
The Elux's don't have coin traps but the LG's do. Not a huge deal IF you check pockets religiously before loading. I'm the only one that does laundry and over the years the ONLY things I can think of that I missed are maybe a couple of dimes and a small screwdriver (all which stayed in the drum) The few times I've checked my coin trap over the years, there's never anything in it but a few little pieces of harmless lint.
If you have multiple people doing laundry and something gets into the pump, I think the entire machine has to be taken apart to get to it. This is the only thing that annoys me about the Elux's. If LG can put a coin trap door right upfront, why don't they?
On the new Duets, I believe they now have a coin trap.....but the Maytags don't. Not sure what's up with that weirdness.
That was another reason I bought the 6620 was for the coin trap. Mark I don't get the company either. Why dont they give Maytag a coin trap access ? I have to say I wouldn't hesitate to buy another Whirlpool front loader when i finally get my place sold.
mark_wpduet
Well-known member
Well
I haven't completely given up on Whirlpool. I love my Maytag dishwasher. Zero problems. My fridge is 2 over 2 years old now. No problems (but I expect problems eventually). It's just the "NEW" stuff feels so much cheaper. I mean, for example, my 2004 Whirlpool fridge (lasted about 13 years) and I had a few repairs on it in that 13 years...but the new comparable Whirlpool fridge just feels HOLLOW to me in comparison. I mean, maybe that's not a bad thing, I don't know.
I do know that for Dryers, I prefer Whirlpool definitely. I think dishwashers too (Maytag) and maybe Range's/microwaves. But the new Duets I'm just not sure about. I think for my next washer (still undecided) but leaning Elux OR LG..
I've drawn this conclusion from videos I've seen of them in operation on YouTube. The LG's turbowash and Elux looked superior to me as far amount of water/ recirculation. Yes, the duet's had recirculation and I've only seen one cycle (I think it was a pillow someone was washing and it was on the bulky cycle) and thank God for the recirculation because there was BARELY any water.....And this was the BULKY cycle, the cycle that has always used the most water..I was cringing while watching it because I was imagining even less water than that in other cycles. I wish I could see more cycles of the new Duets but I can't find them on YouTube.
I haven't completely given up on Whirlpool. I love my Maytag dishwasher. Zero problems. My fridge is 2 over 2 years old now. No problems (but I expect problems eventually). It's just the "NEW" stuff feels so much cheaper. I mean, for example, my 2004 Whirlpool fridge (lasted about 13 years) and I had a few repairs on it in that 13 years...but the new comparable Whirlpool fridge just feels HOLLOW to me in comparison. I mean, maybe that's not a bad thing, I don't know.
I do know that for Dryers, I prefer Whirlpool definitely. I think dishwashers too (Maytag) and maybe Range's/microwaves. But the new Duets I'm just not sure about. I think for my next washer (still undecided) but leaning Elux OR LG..
I've drawn this conclusion from videos I've seen of them in operation on YouTube. The LG's turbowash and Elux looked superior to me as far amount of water/ recirculation. Yes, the duet's had recirculation and I've only seen one cycle (I think it was a pillow someone was washing and it was on the bulky cycle) and thank God for the recirculation because there was BARELY any water.....And this was the BULKY cycle, the cycle that has always used the most water..I was cringing while watching it because I was imagining even less water than that in other cycles. I wish I could see more cycles of the new Duets but I can't find them on YouTube.
I was the one who recorded a couple of cycles with mine in my basement. It's a good machine. Huge capacity. At this point though I am back to using my Speed Queen. The new home I'm looking at doesn't have a washer/dryer so will have to bring my own.
I can always get another front loader but I can't get another AWN432 new.
I can always get another front loader but I can't get another AWN432 new.
mark_wpduet
Well-known member
so then it sounds like
you like the latest generation WP FL washers?
I was noticing they only do ONE default rinse......and if you chose extra rinse, you get a total of 2 rinses. I don't think I'd like only have 2 rinses when I'm used to 2 default rinses and 3 with extra rinse.
you like the latest generation WP FL washers?
I was noticing they only do ONE default rinse......and if you chose extra rinse, you get a total of 2 rinses. I don't think I'd like only have 2 rinses when I'm used to 2 default rinses and 3 with extra rinse.
Where do you notice they do 1 default rinse ?
AFAIK the only cycle that I have used that defaults to one rinse is the colors cycle. The "what to wash" cycles that I used were regular,bulky,whites and towels and those cycles default to 2 rinses. I don't remember if delicate does or not.
I think I only used that once to wash curtains.
Even though there is no "rinse and spin" you can get that by selecting "drain and spin" and using the extra rinse button.
The machine does a high water level rinse for over 5 minutes.Lots of splashing.
AFAIK the only cycle that I have used that defaults to one rinse is the colors cycle. The "what to wash" cycles that I used were regular,bulky,whites and towels and those cycles default to 2 rinses. I don't remember if delicate does or not.
I think I only used that once to wash curtains.
Even though there is no "rinse and spin" you can get that by selecting "drain and spin" and using the extra rinse button.
The machine does a high water level rinse for over 5 minutes.Lots of splashing.
My question though is why does Whirlpool not offer a prewash on their models ?
I know there are people who work at Whirlpool who are on this site. They have a presoak selection, but it is badically just an extended wash with no water change.
I don't get this company lately and why they are making the decisions they are. Seems LG is capturing more new buyers today.
I know there are people who work at Whirlpool who are on this site. They have a presoak selection, but it is badically just an extended wash with no water change.
I don't get this company lately and why they are making the decisions they are. Seems LG is capturing more new buyers today.
jerrod6
Well-known member
Henrik
Are you comparing Elux and LG in the USA or in the EU?
Are you comparing Elux and LG in the USA or in the EU?
jerrod6
Well-known member
When the Whirlpools default to 2 rinses can you get an extra one and make that 3 rinses?
What about temperatures how high do they heat the water for the extra white load?
What about temperatures how high do they heat the water for the extra white load?
John,
Thanks for the hint.
The aroma and steam/smoke was coming from the fill area, which is fairly isolated from the control board. It might just be a wiring issue. I need to pull the washer out from the laundry nook to clean the hot water intake screen anyway, at which time I can pull the rear access panel and see if I can observe any wiring issue.
The washer completed a few more cycles sans heating without incident.
It would be nice if it's just wiring, because the heating element is unobtainium.
If the Neptune craps out completely, I'll probably swap it out with the old Frigidaire, and leave the Miele(s) in the workshop. We'll see. I got choices. Although a new Elux set would be nice.
Thanks for the hint.
The aroma and steam/smoke was coming from the fill area, which is fairly isolated from the control board. It might just be a wiring issue. I need to pull the washer out from the laundry nook to clean the hot water intake screen anyway, at which time I can pull the rear access panel and see if I can observe any wiring issue.
The washer completed a few more cycles sans heating without incident.
It would be nice if it's just wiring, because the heating element is unobtainium.
If the Neptune craps out completely, I'll probably swap it out with the old Frigidaire, and leave the Miele(s) in the workshop. We'll see. I got choices. Although a new Elux set would be nice.
mark_wpduet
Well-known member
Agiflow
Hey - My duet doesn't have prewash either. Back when I bought my Duet, there were 3 models. BOL, MOL, and TOL (they all looked the same except for more cycles/options.) Mine is MOL...I got the cheapest one WITH a heater. I'm almost positive the TOL then had a prewash.
I would much rather have prewash than presoak if all presoak does is extend the wash. I'd rather have a water change. I can't BELIEVE Whirlpool doesn't have that cycle. Luckily, I would rarely need it but when I do, I just use rinse/spin but I add detergent. Then when it's done, I start a cycle with more detergent,etc.
Mine has a soak cycle which I rarely use.
A few years ago I remember hoping my Duet would die because I wanted to get something different, not that anything was wrong with my machine, I just wanted something cooler and newer...but as each year goes by, now I don't want it to die. Each year I hate the new washers more and more.
Hey - My duet doesn't have prewash either. Back when I bought my Duet, there were 3 models. BOL, MOL, and TOL (they all looked the same except for more cycles/options.) Mine is MOL...I got the cheapest one WITH a heater. I'm almost positive the TOL then had a prewash.
I would much rather have prewash than presoak if all presoak does is extend the wash. I'd rather have a water change. I can't BELIEVE Whirlpool doesn't have that cycle. Luckily, I would rarely need it but when I do, I just use rinse/spin but I add detergent. Then when it's done, I start a cycle with more detergent,etc.
Mine has a soak cycle which I rarely use.
A few years ago I remember hoping my Duet would die because I wanted to get something different, not that anything was wrong with my machine, I just wanted something cooler and newer...but as each year goes by, now I don't want it to die. Each year I hate the new washers more and more.
Similar threads
