Ominous rumblings

[newwave1]

Hmm my hotpoints began making a ominous knocking noise on spin! & its bloody loud, i think the bearings are on there way out! The suspension squeeks and the drum wobbles in an anticlockwise tumble too!!

Im wondering weather to get hotpoint out to it now, as the 12month guarentee runs out in oct. thing is i really want rid of it. But financially i dont thinks happening unless i sell maybe my newwave and the hotpoint.

Would you guys get them out now? Or should i wait for it to get abit worse.

Opinions appreciated!

Darren

 

[seamusuk]

Get em out

Hey Darren

Call em ASAP- if you wait till you start getting grease spots on ya clothes ur gonna curse!!

Seamus

 

[newwave1]

Hmm i think i should, it takes bloody ages to balance now, i think the suspensions shot.& its gettin rather noisy! Hmm if i'm lucky they could replace it with a new model lol!

D

 

[dyson2drums]

I hope you get the new ultima!
Good luck anyways.

 

[toggleswitch2]

PICS! PICS! PICS!

Have THEM fix it, under warranty. Then one can sell it when funds repelish and allow for a new toy!

Let us know what happens!

 

[dyson2drums]

Hello Darren
Best off getting it repaired or exchanged.
If the repair goes forward you can sell it as a perfectly working machine and get £££ for it.

 

[robm]

Hi Darren, you want to get this baby fixed soon before it's a real right off, what have you been doing to it tut, tut LOL!

At least if it is fixed you should be able to sell it and get a good price with it being so young. Use the guarentee whilst it is free.

Take care

Rob x

 

[newwave1]

Hey Rob!
Long time no speak! Hope your well mr! What are you insinuating! lol!

I've just took a load out and it was really warm! Thats surely not a good sign?

It was bloomin loud enough, i will film it on the next load!

Darren

 

[samsungfl]

Hey Darren! I think you should get them to fix it! Or you could argue hell out of them until they give in and replace it with one of the new models LOL!

Ive a strong feeling the bearings are going if its getting warm after a cycle! My neighbours Beko gets really hot after the two 1400 spins it does for the final spin now and the bearings are sounding awful, it makes that roaring sound when spinning now!

Keep us posted on what you decided to do !

Rich

 

[newwave1]

Hey Rich!
I've bin puttin it off as i think maybe there not bad enough for a repairman to come out. Its gonna have to wait til my next satdy off as i work 9-6 everyday.

The warmth after the spin has been goin on a while now...The drum is getting auidible when turned too. When its spinning about 1200 theres a little rattling and knocking noise, which i can't decide weather its the suspension or the bearings, and the background there is a very deep sounding whirr. bearings i believe.

Interesting. i think i'm going to get them to replace it. Hopefully a double hit of bearings and suspension should sort that out!

Darren

 

[samsungfl]

Sounds Like a Plan!

Good idea Darren! Leave it to get worse for a month or so then spring it on em'!!

Its always annoying when you can hear things going wrong but you know if an engineer was to hear/see it they'd say its not worth fixing yet! I had the same problems with my Zanussi, it always made a slight roaring sound when turned by hand but I knew if I called them out they'd leave it to get worse, then probably charge me a call out fee for wasting time LOL

Hopefully the new Hotpoints will be better! I had a look at one in Currys today, the new door looks a lot better I think

Rich

 

[newwave1]

Bed and bath load.

ok so tonight, i did a 5kg fast wash with no real problems except for noise and endless balancing.

Now. For the ultimate test, the new 8kg ultimas (though they have the same drum as mine) have the bed and bath cycle, i decided to do a little bed and bath cycle of my own.

Bathrobe, set of sheets and a couple of towels.

The machine has aborted every spin so far. the one after the wash and the 1st rinse. adding 10minutes at a time. The drum just wobbles more and more out of balance! Its bloody ridiculous!

Doesn't this just ooze cheapness?

I'm wondering how our very own mr washyboy2005 is gettin along with his ultima?!

Back to the drawing board i feel.

Darren

 

[washboy2005]

Darren!!!

Sounds like your having a rather rough time there!

My Hotpoint is working really well at the mo - sorry to rub salt into the wound lol.

It's washing well and the bearings are showing no signs of wear yet despite it washing for numerous people and being used at 1600 for nearly every load and its 1year nd 3 months old!!

The only thing I don't like on mine is that it don't have the extra rinse option. The balancing drives me mad at times but i've gotten used to it.

BTW I'd advise you against a replacement new ultima.... they don't have the extra rinse option that yours currently possess.... in the new range it would appear that only the aquarius models have it now!

Otherwise my hotpoints working well, it does have an odd rattle at times when its really out of balance. (yes it really does spin oob at times!!)

Dan

 

[washboy2005]

Oh and mines got some form of mild blockage somewhere in it so that the distri drain thing thinks its empty, and does the first 300rpm burst full of water :-D

However can't get the sump or drain pump off because its held on with stupid plastic clasps rather than metal screw tightened jubilee clips like my friends wf000 has!

The clasps wont budge, ive even hit them with a hammer! lol

Dan

 

[newwave1]

Hey Dan!
That is interesting! lol! My machine spins out of balance too sometimes! And makes the weirdest suspension noise!

I saw the new range when i went to peterborough for the product launch! I Like the look and the new door. But the lack of extra rinse was abit concerning.

I'll have to get a video of it so you can compare it and hear it!

Yes some of the plastic lugs are fiddley! I replaced a suspension leg on a co worker at the co-ops wd420 and those plastic clips are a bugger!

I'm hoping to get it repaired/replaced. and moved on.

Darren

 

[newwave1]

Hey guys!
Heres a video of the offending unit, spinning the bed and bath load as i've rerinsed it as it aborted every spin up to the final one.

Turn your sound up and here it clunking and clackin!

Darren

aitcho86

Share your videos with friends, family, and the world

www.youtube.com

 

[robm]

Hi Darren

That really does sound awful, not what you would expect from such a new machine. My WD640 never sounded like that.

Someone definately needs to look at it. Hopefully you'll get shot of it soon.

Rob

 

[newwave1]

Hey rob!
Will have to find time to have a chat over the phone soon, yea doesn't sound good, I'm wonderin weather they would replace it with a double hit of bearings and suspension?! Hotpoint usually have a 3fold policy before replacing, they have to repair it 3 times before they will. Though when i give them a call i shall give it the big. I've worked in electrical retail for the last 7years i've sold many of your products garb! Should bag me a new one!
lol

Darren

 

[matchboxpaul]

How do Darren.

I just hope my parents machine (same series as yours) doesnt start giving issues.

It is a sheer disgrace the way machinery is seemingly designed for three or so years use, before being carted off to the council tip.

Get yourself a second hand New or Next Generation, or even a WM series - would probably be a tad more reliable than todays machines.

Fingers crossed that you have success with Hotpoint.
Cheers
Paul