here we go again again 2

[bpetersxx]

having to deal with the Maytag dryer

Now the calypso washer have a problem

the control console LED and time indicator have problems lighting up

I thought the ribbon cable was loose and needed to be seated

BUT

The socket on the control board is loose

Need advice on how to proceed

Should replace that one board

Both boards

or the whole console entirely

wo9rks fine otherwise except the bleach hose leaks once in a while due to the seal being bad

 

[combo52]

Calypso, washer, problems

If the socket on the board is loose, you can send it to course centric‘s and have it re-soldered.

I don’t understand why you would replace both boards the whole consul etc. do you have all these parts laying around?

If you have the parts go ahead and replace everything, none of those three parts are still available but you can find good used ones if you want to look around for them

Where the bleach hose attaches to the outer tub they had trouble with leaks. It’s very easy to take it apart clean everything up and use a very good sealant. When you lock it back into the tub, I would use 3M, marine sealant ,

John

 

[bpetersxx]

thanks John

tinkering with the Maytag in the background

But and it is a big but

I have a bigger problem than this

The Calypso is totally dead

I want to check it so i can use it

and

I pressed the buttons on the console but it will not start at all

None of the buttons will turn it on

So I gotta figure out what happened

 

[luxflairguy]

This should and could be in ONE thread! Please don't start another about the same shit different day!

 

[bpetersxx]

butterbeans

Not sure what it was but it is working again

Luxflairguy seems to be upset about me posting

SO I'll solve the problem

I have asked Robert to delete this post

AND

I'll just leave this group them

 

[bpetersxx]

update

going to see if anyone here is interested in new videos of the Calypso

see if I am just wasting my time with them

 

[bpetersxx]

nobody posted so I am wasting my time then

no videos then

 

[adam-aussie-vac]

I’m interested in the videos

As it’s always unusual seeing Calipsos

 

[bpetersxx]

don't worry videos coming soon

 

[DADoES]

 
Calypso vids are always a treat.

 

[bpetersxx]

yep i have jeans to wash as I am wearing jeans at work and in the house

 

[bpetersxx]

update 6

going to try videos see if i can do it right this time so they do not look cruddy like in the past with my videos

had to power reset as it was dead for a bit

 

[bpetersxx]

update 7

still going to video

cycles are fascinating

 

[bpetersxx]

update whaqtever 1

sorry about the resurrection of the thread

dead for a bit but finally got it running

worried something is going out on it and cannot fix it so it runs

Especially since it is the only machine that i can wash jeans in it

 

[bpetersxx]

update 121

well I have made videos

posting to youtube

need opinions if I did them right or not

 

[bpetersxx]

update 7tgiyu

here is is

Need to know if this is acceptable

need to figure out why it is narrow

 

[DADoES]

 
Not clear what's the problem, what is the it that's narrow.

 

[rodknock95]

What did I just watch

I have never seen one of those. Wow

 

[DADoES]

 
Blaze, a Whirlpool Calypso.  There was also a Kenmore version.  The granddaddy of HE toploaders, and the best thus far in terms of washing performance.  Peruse YouTube for other videos.