Solution Is Simple
Run a "boil wash" cycle at least once a month.
Here one alternates between Miele descaling product for dishwasher and washing machines (made by Reckitt Benkiser), and adding two pints to a quart of white vinegar.
Since we have very soft water here, and always use a good TOL detergent like Persil, which have limescale preventing agents built in, deposits aren't really a huge issue. Also since one does tend to be rather lavish with phosphates, that helps as well.
Read on a British commercial laundry site that it is absolutely necessary to put front loaders through a boil wash at least once a month, especially if a majority of washing is done in warm to cold water.
The boiling hot water causes the outer tub of the machine to expand (according to the site), and dissloves all the undissloved detergent powder and residues between the tubs, as well as the rest of the muck. It is that muck, especially soils and oils from laundry that are clinging to washer parts, is what mould feeds on.
Remember fats, oils, and lipids are the main part of soiled laundry, aside from stains. Body oils are just like any other oil, it does not mix well with water, can be hard to remove, and tends to clump and or get sticky at cold temperatures. Detergents for cold water washing supposedly get around this by being stronger. The old advice was to add slighly more detergent when laundering with cold or cool water to compensate.
L.
Run a "boil wash" cycle at least once a month.
Here one alternates between Miele descaling product for dishwasher and washing machines (made by Reckitt Benkiser), and adding two pints to a quart of white vinegar.
Since we have very soft water here, and always use a good TOL detergent like Persil, which have limescale preventing agents built in, deposits aren't really a huge issue. Also since one does tend to be rather lavish with phosphates, that helps as well.
Read on a British commercial laundry site that it is absolutely necessary to put front loaders through a boil wash at least once a month, especially if a majority of washing is done in warm to cold water.
The boiling hot water causes the outer tub of the machine to expand (according to the site), and dissloves all the undissloved detergent powder and residues between the tubs, as well as the rest of the muck. It is that muck, especially soils and oils from laundry that are clinging to washer parts, is what mould feeds on.
Remember fats, oils, and lipids are the main part of soiled laundry, aside from stains. Body oils are just like any other oil, it does not mix well with water, can be hard to remove, and tends to clump and or get sticky at cold temperatures. Detergents for cold water washing supposedly get around this by being stronger. The old advice was to add slighly more detergent when laundering with cold or cool water to compensate.
L.